Lines Matching full:should

9 The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant 
26    around should work; I usually use Workman.
69 2. You should also ensure that the iso9660 filesystem is either
74 3. The CDROM drive should be connected to the host on an IDE
90    driver, you should make sure your IDE interface uses either the
92    the CDROM drive is the only device on the IDE interface, it should
99 4. Boot the system.  If the drive is recognized, you should see a
111    where X should be replaced by the letter indicating where your
114 6. You should be able to see any error messages from the driver with
128 an empty directory.  You should now be able to see the contents of the
139 You should feel free to remove the cdrom line from /etc/fstab and
142 Multisession and photocd discs should work with no special handling.
146 To play an audio CD, you should first unmount and remove any data
147 CDROM.  Any of the CDROM player programs should then work (workman,
157 drive should be unmounted before attempting this.  The program takes
167 experiencing problems, you should probably also review
172 In most cases, you should probably check with `dmesg' for any errors
181    - If your drive is the only device on an IDE interface, it should
264     booting.  Recent kernels should be able to detect the need for
292     of the device special files are correct.  They should be as
310     should be considered obsolete.
346  * information about the changer status.  The drive should be unmounted before 
420 				 "Should be 1 -- %d.\n",
463 			printf ("This Should not happen!\n");
489 				printf ("This Should not happen!\n");