vhost-user: fix lost reconnect

When the vhost-user is reconnecting to the backend, and if the vhost-user fails
at the get_features in vhost_dev_init(), then the reconnect will fail
and it will not b

vhost-user: fix lost reconnect

When the vhost-user is reconnecting to the backend, and if the vhost-user fails
at the get_features in vhost_dev_init(), then the reconnect will fail
and it will not be retriggered forever.

The reason is:
When the vhost-user fails at get_features, the vhost_dev_cleanup will be called
immediately.

vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'.

The reconnect path is:
vhost_user_blk_event
vhost_user_async_close(.. vhost_user_blk_disconnect ..)
qemu_chr_fe_set_handlers <----- clear the notifier callback
schedule vhost_user_async_close_bh

The vhost->vdev is null, so the vhost_user_blk_disconnect will not be
called, then the event fd callback will not be reinstalled.

All vhost-user devices have this issue, including vhost-user-blk/scsi.

With this patch, if the vdev->vdev is null, the fd callback will still
be reinstalled.

Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling")

Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-6-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

vhost-user-scsi: start vhost when guest kicks

Let's keep the same behavior as vhost-user-blk.

Some old guests kick virtqueue before setting VIRTIO_CONFIG_S_DRIVER_OK.

Signed-off-by: Li Feng <fengl

vhost-user-scsi: start vhost when guest kicks

Let's keep the same behavior as vhost-user-blk.

Some old guests kick virtqueue before setting VIRTIO_CONFIG_S_DRIVER_OK.

Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-5-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

vhost-user-scsi: support reconnect to backend

If the backend crashes and restarts, the device is broken.
This patch adds reconnect for vhost-user-scsi.

This patch also improves the error messages,

vhost-user-scsi: support reconnect to backend

If the backend crashes and restarts, the device is broken.
This patch adds reconnect for vhost-user-scsi.

This patch also improves the error messages, and reports some silent errors.

Tested with spdk backend.

Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231009044735.941655-4-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>

show more ...

virtio: call ->vhost_reset_device() during reset

vhost-user-scsi has a VirtioDeviceClass->reset() function that calls
->vhost_reset_device(). The other vhost devices don't notify the vhost
device up

virtio: call ->vhost_reset_device() during reset

vhost-user-scsi has a VirtioDeviceClass->reset() function that calls
->vhost_reset_device(). The other vhost devices don't notify the vhost
device upon reset.

Stateful vhost devices may need to handle device reset in order to free
resources or prevent stale device state from interfering after reset.

Call ->vhost_device_reset() from virtio_reset() so that that vhost
devices are notified of device reset.

This patch affects behavior as follows:
- vhost-kernel: No change in behavior since ->vhost_reset_device() is
not implemented.
- vhost-user: back-ends that negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE now receive a
VHOST_USER_DEVICE_RESET message upon device reset. Otherwise there is
no change in behavior. DPDK, SPDK, libvhost-user, and the
vhost-user-backend crate do not negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE automatically.
- vhost-vdpa: an extra SET_STATUS 0 call is made during device reset.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>

show more ...

vhost-user: do not send RESET_OWNER on device reset

The VHOST_USER_RESET_OWNER message is deprecated in the spec:

This is no longer used. Used to be sent to request disabling all
rings, but s

vhost-user: do not send RESET_OWNER on device reset

The VHOST_USER_RESET_OWNER message is deprecated in the spec:

This is no longer used. Used to be sent to request disabling all
rings, but some back-ends interpreted it to also discard connection
state (this interpretation would lead to bugs). It is recommended
that back-ends either ignore this message, or use it to disable all
rings.

The only caller of vhost_user_reset_device() is vhost_user_scsi_reset().
It checks that F_RESET_DEVICE was negotiated before calling it:

static void vhost_user_scsi_reset(VirtIODevice *vdev)
{
VHostSCSICommon *vsc = VHOST_SCSI_COMMON(vdev);
struct vhost_dev *dev = &vsc->dev;

/*
* Historically, reset was not implemented so only reset devices
* that are expecting it.
*/
if (!virtio_has_feature(dev->protocol_features,
VHOST_USER_PROTOCOL_F_RESET_DEVICE)) {
return;
}

if (dev->vhost_ops->vhost_reset_device) {
dev->vhost_ops->vhost_reset_device(dev);
}
}

Therefore VHOST_USER_RESET_OWNER is actually never sent by
vhost_user_reset_device(). Remove the dead code. This effectively moves
the vhost-user protocol specific code from vhost-user-scsi.c into
vhost-user.c where it belongs.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pci: features, cleanups

vdpa:
shadow vq vlan support
net migration with cvq
cxl:
su

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pci: features, cleanups

vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf

Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...

Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd5d ("hw/core: remove needless
includes") because it removed an adjacent #include.

show more ...

vhost-user: move VhostUserProtocolFeature definition to header file

Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.

Remove previous definitions in hw/scsi/vhost-u

vhost-user: move VhostUserProtocolFeature definition to header file

Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.

Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.

Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.

Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes, features, cleanups

asymmetric crypto support for cryptodev-vhost-user
rom migration w

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes, features, cleanups

asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc

Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
# +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
# N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
# iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
# 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
# x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
# =Do8p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 03:50:09 PM CEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present
vhost_net: add an assertion for TAP client backends
intel_iommu: Fix address space unmap
intel_iommu: Fix flag check in replay
intel_iommu: Fix a potential issue in VFIO dirty page sync
vhost-user: fully use new backend/frontend naming
virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()
hw/i386/pc: Clean up pc_machine_initfn
vdpa: fix not using CVQ buffer in case of error
vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devices
vhost: fix vhost_dev_enable_notifiers() error case
vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQ
vdpa: Add vhost_vdpa_net_load_offloads()
virtio-net: expose virtio_net_supported_guest_offloads()
hw/net/virtio-net: make some VirtIONet const
vdpa: reuse virtio_vdev_has_feature()
include/hw/virtio: make some VirtIODevice const
vdpa: map shadow vrings with MAP_SHARED
vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len function
vdpa: do not block migration if device has cvq and x-svq=on
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/virtio: Remove unnecessary 'virtio-access.h' header

None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remo

hw/virtio: Remove unnecessary 'virtio-access.h' header

None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.

Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,virtio: regression, test fixes

fixes regressions:
virtio error message triggered by seabios
fail

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,virtio: regression, test fixes

fixes regressions:
virtio error message triggered by seabios
failure in vhost due to VIRTIO_F_RING_RESET
broken keyboard under seabios

some biosbits test fixes

there's still a known regression with migration and vsock,
not fixed yet.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2
# 98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE
# 04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk
# DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn
# 6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ
# I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE=
# =bF2U
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 22 Nov 2022 05:22:06 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio: disable error for out of spec queue-enable
acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
tests/avocado: configure acpi-bits to use avocado timeout
MAINTAINERS: add mst to list of biosbits maintainers
tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
acpi: x86: move RPQx field back to _SB scope
tests: acpi: whitelist DSDT before moving PRQx to _SB scope
vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices

Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices

vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices

Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.

This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.

This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.

Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,virtio: features, tests, fixes, cleanups

virtio introspection
new serial number opton for cxl
vhost user

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,virtio: features, tests, fixes, cleanups

virtio introspection
new serial number opton for cxl
vhost user blk dynamic config size
virtio-gpio vhost user backend

Tests fixes cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNEVeoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph8YH+gMWpb5IglE0Q+H2JiQPBwB/Ghy1ohRKnOvZ
# lChB7+oy18o2xXRFTOXwG9Ijqsbdn0QMbU/r3NWxBuMzxDow012xiMDniJlJmcXw
# /4POOCSTKrIfzVBhsEErVSA9NwSE5cQKr1oiRBGIa9UdZfZ//v7s6SoP4vtyj8RZ
# UJVYVnMDtq/0PaN92IMs06lhqo/LkegE7gTGHMBf8Nvw4SgQoZgfPyp1eR+dKOhz
# lXNqqvTds9yt8yS65UWbuSrZ9d7GpCQf8nuyLaLaENHd6FQUVfmTTT37l2EKziwp
# PK0EwWMHeGkj7LHrylztradhE9xBlIW23ROP8wPdGZHmgLNHbC0=
# =20Zb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Oct 2022 13:27:06 EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (55 commits)
x86: pci: acpi: consolidate PCI slots creation
tests: acpi: update expected blobs
x86: pci: acpi: reorder Device's _DSM method
tests: acpi: whitelist pc/q35 DSDT before moving _ADR field
tests: acpi: update expected blobs
x86: pci: acpi: reorder Device's _ADR and _SUN fields
tests: acpi: whitelist pc/q35 DSDT before moving _ADR field
tests: acpi: update expected blobs
x86: acpi: cleanup PCI device _DSM duplication
tests: acpi: whitelist pc/q35 DSDT before switching _DSM to use ASUN
tests: acpi: update expected blobs
x86: acpi: _DSM: use Package to pass parameters
acpi: x86: refactor PDSM method to reduce nesting
tests: acpi: whitelist pc/q35 DSDT due to HPET AML move
tests: acpi: update expected blobs after HPET move
acpi: x86: deduplicate HPET AML building
tests: acpi: whitelist pc/q35 DSDT due to HPET AML move
hw/smbios: support for type 8 (port connector)
pci: Sanity check mask argument to pci_set_*_by_mask()
pci: Remove unused pci_get_*_by_mask() functions
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/virtio: move vhd->started check into helper and add FIXME

The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
d

hw/virtio: move vhd->started check into helper and add FIXME

The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>

show more ...

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/vhost-user-scsi|blk: set `supports_config` flag correctly

Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so he

hw/vhost-user-scsi|blk: set `supports_config` flag correctly

Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so here we set the flag in vhost-user-blk driver
and unset it in vhost-user-scsi.

Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <20220525125540.50979-2-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>

show more ...

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

most of CXL support
fixes, cleanups all over the place

Signed-off-by:

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

most of CXL support
fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
vhost-user-scsi: avoid unlink(NULL) with fd passing
virtio-net: don't handle mq request in userspace handler for vhost-vdpa
vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
vhost-vdpa: backend feature should set only once
vhost-net: fix improper cleanup in vhost_net_start
vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
hw/i386/amd_iommu: Fix IOMMU event log encoding errors
hw/i386: Make pic a property of common x86 base machine type
hw/i386: Make pit a property of common x86 base machine type
include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
vhost-user: more master/slave things
virtio: add vhost support for virtio devices
virtio: drop name parameter for virtio_init()
virtio/vhost-user: dynamically assign VhostUserHostNotifiers
hw/virtio/vhost-user: don't suppress F_CONFIG when supported
include/hw: start documenting the vhost API
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/virtio/vhost-user: don't suppress F_CONFIG when supported

Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
th

hw/virtio/vhost-user: don't suppress F_CONFIG when supported

Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.

Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.

Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Supporting changing 'file' in x-blockdev-reopen
- ssh: add support for sha256 host key fingerprints

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Supporting changing 'file' in x-blockdev-reopen
- ssh: add support for sha256 host key fingerprints
- vhost-user-blk: Implement reconnection during realize
- introduce QEMU_AUTO_VFREE
- Don't require password of encrypted backing file for image creation
- Code cleanups

# gpg: Signature made Wed 30 Jun 2021 17:00:55 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (24 commits)
vhost-user-blk: Implement reconnection during realize
vhost-user-blk: Factor out vhost_user_blk_realize_connect()
vhost: Distinguish errors in vhost_dev_get_config()
vhost-user-blk: Add Error parameter to vhost_user_blk_start()
vhost: Return 0/-errno in vhost_dev_init()
vhost: Distinguish errors in vhost_backend_init()
vhost: Add Error parameter to vhost_dev_init()
block/ssh: add support for sha256 host key fingerprints
block/commit: use QEMU_AUTO_VFREE
introduce QEMU_AUTO_VFREE
iotests: Test replacing files with x-blockdev-reopen
block: Allow changing bs->file on reopen
block: BDRVReopenState: drop replace_backing_bs field
block: move supports_backing check to bdrv_set_file_or_backing_noperm()
block: bdrv_reopen_parse_backing(): simplify handling implicit filters
block: bdrv_reopen_parse_backing(): don't check frozen child
block: bdrv_reopen_parse_backing(): don't check aio context
block: introduce bdrv_set_file_or_backing_noperm()
block: introduce bdrv_remove_file_or_backing_child()
block: comment graph-modifying function not updating permissions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

vhost: Add Error parameter to vhost_dev_init()

This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make

vhost: Add Error parameter to vhost_dev_init()

This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make use of this because they already have an Error
parameter themselves. The others just keep printing the error with
error_report_err().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-2-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging

Machine queue, 2020-12-23

Cleanup:
* qdev code cleanup (Eduardo Habkost)

Bug fix:
* hostmem: Free hos

Merge remote-tracking branch 'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging

Machine queue, 2020-12-23

Cleanup:
* qdev code cleanup (Eduardo Habkost)

Bug fix:
* hostmem: Free host_nodes list right after visited (Keqian Zhu)

# gpg: Signature made Wed 23 Dec 2020 21:25:58 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost-gl/tags/machine-next-pull-request:
bugfix: hostmem: Free host_nodes list right after visited
qdev: Avoid unnecessary DeviceState* variable at set_prop_arraylen()
qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr()
qdev: Move qdev_prop_tpm declaration to tpm_prop.h
qdev: Make qdev_class_add_property() more flexible
qdev: Make PropertyInfo.create return ObjectProperty*
qdev: Move dev->realized check to qdev_property_set()
qdev: Wrap getters and setters in separate helpers
qdev: Add name argument to PropertyInfo.create method
qdev: Add name parameter to qdev_class_add_property()
qdev: Avoid using prop->name unnecessarily
qdev: Get just property name at error_set_from_qdev_prop_error()
sparc: Use DEFINE_PROP for nwindows property
qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros
qdev: Move softmmu properties to qdev-properties-system.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: Move softmmu properties to qdev-properties-system.h

Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.

Signed-off-by

qdev: Move softmmu properties to qdev-properties-system.h

Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,acpi: features, fixes

better number of queues for vhost
smbios speed options
acpi fixes

Signed-off-by: Michael S

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,acpi: features, fixes

better number of queues for vhost
smbios speed options
acpi fixes

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 27 Aug 2020 13:33:49 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
tests/bios-tables-test: add smbios cpu speed test
hw/smbios: add options for type 4 max-speed and current-speed
vhost-user-blk-pci: default num_queues to -smp N
virtio-blk-pci: default num_queues to -smp N
virtio-scsi-pci: default num_queues to -smp N
virtio-scsi: introduce a constant for fixed virtqueues
virtio-pci: add virtio_pci_optimal_num_queues() helper
Introduce a new flag for i440fx to disable PCI hotplug on the root bus
acpi: update expected DSDT files with _UID changes
disassemble-aml: -o actually works
arm/acpi: fix an out of spec _UID for PCI root
i386/acpi: fix inconsistent QEMU/OVMF device paths
acpi: allow DSDT changes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

virtio-scsi-pci: default num_queues to -smp N

Automatically size the number of virtio-scsi-pci, vhost-scsi-pci, and
vhost-user-scsi-pci request virtqueues to match the number of vCPUs.
Other transpo

virtio-scsi-pci: default num_queues to -smp N

Automatically size the number of virtio-scsi-pci, vhost-scsi-pci, and
vhost-user-scsi-pci request virtqueues to match the number of vCPUs.
Other transports continue to default to 1 request virtqueue.

A 1:1 virtqueue:vCPU mapping ensures that completion interrupts are
handled on the same vCPU that submitted the request. No IPI is
necessary to complete an I/O request and performance is improved. The
maximum number of MSI-X vectors and virtqueues limit are respected.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200818143348.310613-6-stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

virtio-scsi: introduce a constant for fixed virtqueues

The event and control virtqueues are always present, regardless of the
multi-queue configuration. Define a constant so that virtqueue number
c

virtio-scsi: introduce a constant for fixed virtqueues

The event and control virtqueues are always present, regardless of the
multi-queue configuration. Define a constant so that virtqueue number
calculations are easier to read.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20200818143348.310613-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
* Hyper-V initial support (Jon)
* i386 TCG

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
* Hyper-V initial support (Jon)
* i386 TCG fixes (x87 and SSE, Joseph)
* vmport cleanup and improvements (Philippe, Liran)
* Use-after-free with vCPU hot-unplug (Nengyuan)
* run-coverity-scan improvements (myself)
* Record/replay fixes (Pavel)
* -machine kernel_irqchip=split improvements for INTx (Peter)
* Code cleanups (Philippe)
* Crash and security fixes (PJP)
* HVF cleanups (Roman)

# gpg: Signature made Fri 12 Jun 2020 16:57:04 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (116 commits)
target/i386: Remove obsolete TODO file
stubs: move Xen stubs to accel/
replay: fix replay shutdown for console mode
exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h'
hw/usb: Move device-specific declarations to new 'hcd-musb.h' header
exec/memory: Remove unused MemoryRegionMmio type
checkpatch: reversed logic with acpi test checks
target/i386: sev: Unify SEVState and SevGuestState
target/i386: sev: Remove redundant handle field
target/i386: sev: Remove redundant policy field
target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields
target/i386: sev: Partial cleanup to sev_state global
target/i386: sev: Embed SEVState in SevGuestState
target/i386: sev: Rename QSevGuestInfo
target/i386: sev: Move local structure definitions into .c file
target/i386: sev: Remove unused QSevGuestInfoClass
xen: fix build without pci passthrough
i386: hvf: Drop HVFX86EmulatorState
i386: hvf: Move mmio_buf into CPUX86State
i386: hvf: Move lazy_flags into CPUX86State
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/i386/acpi-build.c

show more ...