Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: features, fixes

virtio-iommu support for x86/ACPI.
Fixes, cleanups all over the place.

Signed-off-by: Micha

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: features, fixes

virtio-iommu support for x86/ACPI.
Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 01 Nov 2021 07:36:22 PM EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]

* remotes/mst/tags/for_upstream:
hw/i386: fix vmmouse registration
pci: Export pci_for_each_device_under_bus*()
pci: Define pci_bus_dev_fn/pci_bus_fn/pci_bus_ret_fn
hw/i386/pc: Allow instantiating a virtio-iommu device
hw/i386/pc: Move IOMMU singleton into PCMachineState
hw/i386/pc: Remove x86_iommu_get_type()
hw/acpi: Add VIOT table
vhost-vdpa: Set discarding of RAM broken when initializing the backend
qtest: fix 'expression is always false' build failure in qtest_has_accel()

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

pci: Export pci_for_each_device_under_bus*()

They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand. After exporting we can switch

pci: Export pci_for_each_device_under_bus*()

They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand. After exporting we can switch a lot
of the call sites to use these two helpers.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.2-20210827' into staging

ppc patch queue 2021-08-27

First ppc pull request for qemu-6.2. As usual, there's a fair bit
here, since it'

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.2-20210827' into staging

ppc patch queue 2021-08-27

First ppc pull request for qemu-6.2. As usual, there's a fair bit
here, since it's been queued during the 6.1 freeze. Highlights are:

* Some fixes for 128 bit arithmetic and some vector opcodes that use
them
* Significant improvements to the powernv to support POWER10 cpus
(more to come though)
* Several cleanups to the ppc softmmu code
* A few other assorted fixes

# gpg: Signature made Fri 27 Aug 2021 08:09:12 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.2-20210827:
target/ppc: fix vector registers access in gdbstub for little-endian
include/qemu/int128.h: introduce bswap128s
target/ppc: fix vextu[bhw][lr]x helpers
include/qemu/int128.h: define struct Int128 according to the host endianness
ppc/xive: Export xive_presenter_notify()
ppc/xive: Export PQ get/set routines
ppc/pnv: add a chip topology index for POWER10
ppc/pnv: Distribute RAM among the chips
ppc/pnv: Use a simple incrementing index for the chip-id
ppc/pnv: powerpc_excp: Do not discard HDECR exception when entering power-saving mode
ppc/pnv: Change the POWER10 machine to support DD2 only
ppc: Add a POWER10 DD2 CPU
ppc/pnv: update skiboot to commit 820d43c0a775.
target/ppc: moved store_40x_sler to helper_regs.c
target/ppc: moved ppc_store_sdr1 to mmu_common.c
target/ppc: divided mmu_helper.c in 2 files
spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree
xive: Remove extra '0x' prefix in trace events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree

This uses g_autofree to simplify logic in spapr_phb_vfio_get_loc_code(),
in the process fixing a leak in one of the paths. I'm t

spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree

This uses g_autofree to simplify logic in spapr_phb_vfio_get_loc_code(),
in the process fixing a leak in one of the paths. I'm told this fixes
Coverity error CID 1460454

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 16b0ea1d852 ("spapr_pci: populate ibm,loc-code")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Do not include exec/address-spaces.h if it's not really necessary

Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <202104

Do not include exec/address-spaces.h if it's not really necessary

Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Do not include cpu.h if it's not really necessary

Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.

Do not include cpu.h if it's not really necessary

Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. Includes:
* Seve

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups

# gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210310:
spapr.c: send QAPI event when memory hotunplug fails
spapr.c: remove duplicated assert in spapr_memory_unplug_request()
target/ppc: fix icount support on Book-e vms accessing SPRs
qemu_timer.c: add timer_deadline_ms() helper
spapr_pci.c: add 'unplug already in progress' message for PCI unplug
spapr.c: add 'unplug already in progress' message for PHB unplug
hw/ppc: e500: Add missing <ranges> in the eTSEC node
hw/net: fsl_etsec: Fix build error when HEX_DUMP is on
spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state
spapr_drc.c: add hotunplug timeout for CPUs
spapr_drc.c: introduce unplug_timeout_timer
target/ppc: Fix bcdsub. emulation when result overflows
docs/system: Extend PPC section
spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable
pseries: Update SLOF firmware image
spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical()
hw/display/sm501: Inline template header into C file
hw/display/sm501: Expand out macros in template header
hw/display/sm501: Remove dead code for non-32-bit RGB surfaces

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci.c: add 'unplug already in progress' message for PCI unplug

Hotunplug for all other devices are warning the user when the hotunplug
is already in progress. Do the same for PCI devices in
sp

spapr_pci.c: add 'unplug already in progress' message for PCI unplug

Hotunplug for all other devices are warning the user when the hotunplug
is already in progress. Do the same for PCI devices in
spapr_pci_unplug_request().

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210226163301.419727-5-danielhb413@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()

spapr_drc_detach() is not the best name for what the function does. The
function does not detach the DRC, it makes an uncommited attemp

spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()

spapr_drc_detach() is not the best name for what the function does. The
function does not detach the DRC, it makes an uncommited attempt to do
it. It'll mark the DRC as pending unplug, via the 'unplug_request'
flag, and only if the DRC state is drck->empty_state it will detach the
DRC, via spapr_drc_release().

This is a contrast with its pair spapr_drc_attach(), where the function
is indeed creating the DRC QOM object. If you know what
spapr_drc_attach() does, you can be misled into thinking that
spapr_drc_detach() is removing the DRC from QEMU internal state, which
isn't true.

The current role of this function is better described as a request for
detach, since there's no guarantee that we're going to detach the DRC in
the end. Rename the function to spapr_drc_unplug_request to reflect
what is is doing.

The initial idea was to change the name to spapr_drc_detach_request(),
and later on change the unplug_request flag to detach_request. However,
unplug_request is a migratable boolean for a long time now and renaming
it is not worth the trouble. spapr_drc_unplug_request() setting
drc->unplug_request is more natural than spapr_drc_detach_request
setting drc->unplug_request.

Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210222194531.62717-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210210' into staging

ppc patch queue for 20201-02-10

Here's the latest batch of patches for the ppc target and machine
types. Hig

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210210' into staging

ppc patch queue for 20201-02-10

Here's the latest batch of patches for the ppc target and machine
types. Highlights are:
* Several fixes for E500 from Bin Meng
* Fixes and cleanups for PowerNV from Cédric Le Goater
* Assorted other fixes and cleanups

# gpg: Signature made Wed 10 Feb 2021 06:16:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210210:
target/ppc: Add E500 L2CSR0 write helper
hw/net: fsl_etsec: Reverse the RCTRL.RSF logic
hw/ppc: e500: Fill in correct <clock-frequency> for the serial nodes
hw/ppc: e500: Use a macro for the platform clock frequency
ppc/pnv: Set default RAM size to 1 GB
spapr_numa.c: fix ibm,max-associativity-domains calculation
spapr_numa.c: create spapr_numa_initial_nvgpu_numa_id() helper
spapr: move spapr_machine_using_legacy_numa() to spapr_numa.c
ppc/pnv: Introduce a LPC FW memory region attribute to map the PNOR
ppc/pnv: Remove default disablement of the PNOR contents
ppc/pnv: Discard internal BMC initialization when BMC is external
ppc/pnv: Simplify pnv_bmc_create()
ppc/pnv: Use skiboot addresses to load kernel and ramfs
ppc/xive: Add firmware bit when dumping the ENDs
ppc/pnv: Add trace events for PCI event notification
target/ppc: Remove unused MMU definitions
spapr: Adjust firmware path of PCI devices
spapr.c: add 'name' property for hotplugged CPUs nodes
spapr.c: use g_auto* with 'nodename' in CPU DT functions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Adjust firmware path of PCI devices

It is currently not possible to perform a strict boot from USB storage:

$ qemu-system-ppc64 -accel kvm -nodefaults -nographic -serial stdio \
-boot stric

spapr: Adjust firmware path of PCI devices

It is currently not possible to perform a strict boot from USB storage:

$ qemu-system-ppc64 -accel kvm -nodefaults -nographic -serial stdio \
-boot strict=on \
-device qemu-xhci \
-device usb-storage,drive=disk,bootindex=0 \
-blockdev driver=file,node-name=disk,filename=fedora-ppc64le.qcow2

SLOF **********************************************************************
QEMU Starting
Build Date = Jul 17 2020 11:15:24
FW Version = git-e18ddad8516ff2cf
Press "s" to enter Open Firmware.

Populating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /pci@800000020000000
00 0000 (D) : 1b36 000d serial bus [ usb-xhci ]
No NVRAM common partition, re-initializing...
Scanning USB
XHCI: Initializing
USB Storage
SCSI: Looking for devices
101000000000000 DISK : "QEMU QEMU HARDDISK 2.5+"
Using default console: /vdevice/vty@71000000

Welcome to Open Firmware

Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php

Trying to load: from: /pci@800000020000000/usb@0/storage@1/disk@101000000000000 ...
E3405: No such device

E3407: Load failed

Type 'boot' and press return to continue booting the system.
Type 'reset-all' and press return to reboot the system.

Ready!
0 >

The device tree handed over by QEMU to SLOF indeed contains:

qemu,boot-list =
"/pci@800000020000000/usb@0/storage@1/disk@101000000000000 HALT";

but the device node is named usb-xhci@0, not usb@0.

This happens because the firmware names of PCI devices returned
by get_boot_devices_list() come from pcibus_get_fw_dev_path(),
while the sPAPR PHB code uses a different naming scheme for
device nodes. This inconsistency has always been there but it was
hidden for a long time because SLOF used to rename USB device
nodes, until this commit, merged in QEMU 4.2.0 :

commit 85164ad4ed9960cac842fa4cc067c6b6699b0994
Author: Alexey Kardashevskiy <aik@ozlabs.ru>
Date: Wed Sep 11 16:24:32 2019 +1000

pseries: Update SLOF firmware image

This fixes USB host bus adapter name in the device tree to match QEMU's
one.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Fortunately, sPAPR implements the firmware path provider interface.
This provides a way to override the default firmware paths.

Just factor out the sPAPR PHB naming logic from spapr_dt_pci_device()
to a helper, and use it in the sPAPR firmware path provider hook.

Fixes: 85164ad4ed99 ("pseries: Update SLOF firmware image")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210122170157.246374-1-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)
* initial attempt at fixing event_notifier emulation (Maxim)
* i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself)
* meson: RBD test fixes (myself)
* meson: TCI warnings (Philippe)
* Leaner build for --disable-guest-agent, --disable-system and
--disable-tools (Philippe, Stefan)
* --enable-tcg-interpreter fix (Richard)
* i386: SVM feature bits (Wei)
* KVM bugfix (Thomas H.)
* Add missing MemoryRegionOps callbacks (PJP)

# gpg: Signature made Mon 08 Feb 2021 14:15:35 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (46 commits)
target/i386: Expose VMX entry/exit load pkrs control bits
target/i386: Add support for save/load IA32_PKRS MSR
imx7-ccm: add digprog mmio write method
tz-ppc: add dummy read/write methods
spapr_pci: add spapr msi read method
nvram: add nrf51_soc flash read method
prep: add ppc-parity write method
vfio: add quirk device write method
pci-host: designware: add pcie-msi read method
hw/pci-host: add pci-intack write method
cpu-throttle: Remove timer_mod() from cpu_throttle_set()
replay: rng-builtin support
pc-bios/descriptors: fix paths in json files
replay: fix replay of the interrupts
accel/kvm/kvm-all: Fix wrong return code handling in dirty log code
qapi/meson: Restrict UI module to system emulation and tools
qapi/meson: Restrict system-mode specific modules
qapi/meson: Remove QMP from user-mode emulation
qapi/meson: Restrict qdev code to system-mode emulation
meson: Restrict emulation code
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging

Migration pull 2021-02-08

v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging

Migration pull 2021-02-08

v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled

# gpg: Signature made Mon 08 Feb 2021 11:28:14 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20210208a: (27 commits)
migration: only check page size match if RAM postcopy is enabled
migration: introduce snapshot-{save, load, delete} QMP commands
iotests: fix loading of common.config from tests/ subdir
iotests: add support for capturing and matching QMP events
migration: introduce a delete_snapshot wrapper
migration: wire up support for snapshot device selection
migration: control whether snapshots are ovewritten
block: rename and alter bdrv_all_find_snapshot semantics
block: allow specifying name of block device for vmstate storage
block: add ability to specify list of blockdevs during snapshot
migration: stop returning errno from load_snapshot()
migration: Make save_snapshot() return bool, not 0/-1
block: push error reporting into bdrv_all_*_snapshot functions
migration: Display the migration blockers
migration: Add blocker information
migration: Fix a few absurdly defective error messages
migration: Fix cache_init()'s "Failed to allocate" error messages
migration: Clean up signed vs. unsigned XBZRLE cache-size
migration: Fix migrate-set-parameters argument validation
migration: introduce 'userfaultfd-wrlat.py' script
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: add spapr msi read method

Add spapr msi mmio read method to avoid NULL pointer dereference
issue.

Reported-by: Lei Sun <slei.casper@gmail.com>
Acked-by: David Gibson <david@gibson.dropbe

spapr_pci: add spapr msi read method

Add spapr msi mmio read method to avoid NULL pointer dereference
issue.

Reported-by: Lei Sun <slei.casper@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200811114133.672647-7-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

spapr_pci: Fix memory leak of vmstate_spapr_pci

When VM migrate VMState of spapr_pci, the field(msi_devs) of spapr_pci
having a flag of VMS_ALLOC need to allocate memory. If the src doesn't free
mem

spapr_pci: Fix memory leak of vmstate_spapr_pci

When VM migrate VMState of spapr_pci, the field(msi_devs) of spapr_pci
having a flag of VMS_ALLOC need to allocate memory. If the src doesn't free
memory of msi_devs in SaveStateEntry of spapr_pci after QEMUFile save
VMState of spapr_pci, it may result in memory leak of msi_devs. We add the
post_save func to free memory, which prevents memory leak.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jinhao Gao <gaojinhao@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201231061020.828-2-gaojinhao@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20201214' into staging

ppc patch queue 2020-12-14

Here's my first pull request for qemu-6.0, with a bunch of things
queued over the

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20201214' into staging

ppc patch queue 2020-12-14

Here's my first pull request for qemu-6.0, with a bunch of things
queued over the freeze. Highlights are:
* A bunch of cleanups to hotplug error paths from Greg Kurz
* A number of TCG fixes from new contributor Giuseppe Musacchio
* Added Greg Kurz as co-maintainer
* Assorted other bugfixes and cleanups

This supersedes ppc-for-6.0-20201211, the only change are some patch
authors to better match qemu conventions.

# gpg: Signature made Mon 14 Dec 2020 04:57:09 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20201214: (30 commits)
spapr.c: set a 'kvm-type' default value instead of relying on NULL
spapr: Pass sPAPR machine state to some RTAS events handling functions
spapr: Don't use qdev_get_machine() in spapr_msi_write()
spapr: Pass sPAPR machine state down to spapr_pci_switch_vga()
target/ppc: Introduce an mmu_is_64bit() helper
ppc/translate: Use POWERPC_MMU_64 to detect 64-bit MMU models
ppc/e500: Free irqs array to avoid memleak
MAINTAINERS: Add Greg Kurz as co-maintainer for ppc
hw/ppc: Do not re-read the clock on pre_save if doing savevm
target/ppc: Remove "compat" property of server class POWER CPUs
spapr: spapr_drc_attach() cannot fail
spapr: Simplify error path of spapr_core_plug()
spapr: Abort if ppc_set_compat() fails for hot-plugged CPUs
spapr: Fix pre-2.10 dummy ICP hack
xive: Add trace events
hw/ppc/spapr_tpm_proxy: Fix hexadecimal format string specifier
ppc/translate: Rewrite gen_lxvdsx to use gvec primitives
ppc/translate: Raise exceptions after setting the cc
ppc/translate: Delay NaN checking after comparison
ppc/translate: Turn the helper macros into functions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Don't use qdev_get_machine() in spapr_msi_write()

spapr_phb_realize() passes the sPAPR machine state as opaque data
for the I/O callbacks:

memory_region_init_io(&sphb->msiwindow, OBJECT(sphb

spapr: Don't use qdev_get_machine() in spapr_msi_write()

spapr_phb_realize() passes the sPAPR machine state as opaque data
for the I/O callbacks:

memory_region_init_io(&sphb->msiwindow, OBJECT(sphb), &spapr_msi_ops, spapr,
^^^^^
"msi", msi_window_size);

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: Pass sPAPR machine state down to spapr_pci_switch_vga()

This allows to drop a user of qdev_get_machine().

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-4-grou

spapr: Pass sPAPR machine state down to spapr_pci_switch_vga()

This allows to drop a user of qdev_get_machine().

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-4-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: spapr_drc_attach() cannot fail

All users are passing &error_abort already. Document the fact
that spapr_drc_attach() should only be passed a free DRC, which
is supposedly the case if appropri

spapr: spapr_drc_attach() cannot fail

All users are passing &error_abort already. Document the fact
that spapr_drc_attach() should only be passed a free DRC, which
is supposedly the case if appropriate checking is done earlier.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: Do PCI device hotplug sanity checks at pre-plug only

The PHB acts as the hotplug handler for PCI devices. It does some
sanity checks on DR enablement, PCI bridge chassis numbers and
multifunc

spapr: Do PCI device hotplug sanity checks at pre-plug only

The PHB acts as the hotplug handler for PCI devices. It does some
sanity checks on DR enablement, PCI bridge chassis numbers and
multifunction. These checks are currently performed at plug time,
but they would best sit in a pre-plug handler in order to error
out as early as possible.

Create a spapr_pci_pre_plug() handler and move all the checking
there. Add a check that the associated DRC doesn't already have
an attached device. This is equivalent to the slot availability
check performed by do_pci_register_device() upon realization of
the PCI device.

This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Trivial Patches Pull request 20201013

# gpg: Signature made Tue 13 Oct 2020 12:49:59 BST
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Trivial Patches Pull request 20201013

# gpg: Signature made Tue 13 Oct 2020 12:49:59 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
meson.build: drop duplicate 'sparc64' entry
mingw: fix error __USE_MINGW_ANSI_STDIO redefined
target/sparc/int32_helper: Remove duplicated 'Tag Overflow' entry
goldfish_rtc: change MemoryRegionOps endianness to DEVICE_NATIVE_ENDIAN
hw/char/serial: remove duplicate .class_init in serial_mm_info
block/blkdebug: fix memory leak
hw/pci: Fix typo in PCI hot-plug error message
softmmu/memory: Log invalid memory accesses
hw/acpi/piix4: Rename piix4_pm_add_propeties() to piix4_pm_add_properties()
vmdk: fix maybe uninitialized warnings
tests/test-char: Use a proper fallthrough comment
hw/block/nvme: Simplify timestamp sum
target/i386/cpu: Update comment that mentions Texinfo
qemu-img-cmds.hx: Update comment that mentions Texinfo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/pci: Fix typo in PCI hot-plug error message

'occupied' is spelled like 'ocuppied' in the message.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@re

hw/pci: Fix typo in PCI hot-plug error message

'occupied' is spelled like 'ocuppied' in the message.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006133958.600932-1-jusual@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201009' into staging

ppc patch queue 2020-10-09

Here's the next set of ppc related patches for qemu-5.2. There are
two main things

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201009' into staging

ppc patch queue 2020-10-09

Here's the next set of ppc related patches for qemu-5.2. There are
two main things here:

* Cleanups to error handling in spapr from Greg Kurz
* Improvements to NUMA handling for spapr from Daniel Barboza

There are also a handful of other bugfixes.

# gpg: Signature made Fri 09 Oct 2020 07:02:29 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20201009:
specs/ppc-spapr-numa: update with new NUMA support
spapr_numa: consider user input when defining associativity
spapr_numa: change reference-points and maxdomain settings
spapr_numa: forbid asymmetrical NUMA setups
spapr: add spapr_machine_using_legacy_numa() helper
ppc/pnv: Increase max firmware size
spapr: Add a return value to spapr_check_pagesize()
spapr: Add a return value to spapr_nvdimm_validate()
spapr: Simplify error handling in spapr_cpu_core_realize()
spapr: Add a return value to spapr_set_vcpu_id()
spapr: Simplify error handling in prop_get_fdt()
spapr: Add a return value to spapr_drc_attach()
spapr: Simplify error handling in spapr_vio_busdev_realize()
spapr: Simplify error handling in do_client_architecture_support()
spapr: Get rid of cas_check_pvr() error reporting
spapr: Simplify error handling in callers of ppc_set_compat()
ppc: Fix return value in cpu_post_load() error path
ppc: Add a return value to ppc_set_compat() and ppc_set_compat_all()
spapr: Fix error leak in spapr_realize_vcpu()
spapr: Handle HPT allocation failure in nested guest

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Add a return value to spapr_drc_attach()

As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.

Signe

spapr: Add a return value to spapr_drc_attach()

As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-9-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...