Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20181108' into staging

ppc patch queue 2018-11-08

Here's another patch of accumulated ppc patches for qemu-3.1.
Highlights are:
* Su

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20181108' into staging

ppc patch queue 2018-11-08

Here's another patch of accumulated ppc patches for qemu-3.1.
Highlights are:
* Support for nested HV KVM on POWER9 hosts
* Remove Alex Graf as ppc maintainer
* Emulation of external PID instructions

# gpg: Signature made Thu 08 Nov 2018 12:14:27 GMT
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20181108: (22 commits)
ppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV
target/ppc: Add one reg id for ptcr
This patch fixes processing of rfi instructions in icount mode.
hw/ppc/ppc440_uc: Remove dead code in sdram_size()
MAINTAINERS: PPC: Remove myself
ppc/pnv: check size before data buffer access
target/ppc: fix mtmsr instruction for icount
hw/ppc/mac_newworld: Free openpic_irqs array after use
macio/pmu: Fix missing vmsd terminator
spapr_pci: convert g_malloc() to g_new()
target/ppc: Split out float_invalid_cvt
target/ppc: Split out float_invalid_op_div
target/ppc: Split out float_invalid_op_mul
target/ppc: Split out float_invalid_op_addsub
target/ppc: Introduce fp number classification
target/ppc: Remove float_check_status
target/ppc: Split up float_invalid_op_excp
hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c
PPC: e500: convert SysBus init method to a realize method
ppc4xx_pci: convert SysBus init method to a realize method
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: convert g_malloc() to g_new()

When allocating an array, it is a recommended coding practice to call
g_new(FooType, n) instead of g_malloc(n * sizeof(FooType)) because
it takes care to avo

spapr_pci: convert g_malloc() to g_new()

When allocating an array, it is a recommended coding practice to call
g_new(FooType, n) instead of g_malloc(n * sizeof(FooType)) because
it takes care to avoid overflow when calculating the size of the
allocated block and it returns FooType *, which allows the compiler
to perform type checking.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging

Error reporting patches for 2018-10-22

# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging

Error reporting patches for 2018-10-22

# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

error: Fix use of error_prepend() with &error_fatal, &error_abort

From include/qapi/error.h:

* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);

error: Fix use of error_prepend() with &error_fatal, &error_abort

From include/qapi/error.h:

* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);

Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.

Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.

Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.

Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging

ppc patch queue 2018-09-25

Here are the accumulated ppc target patches for the last several
weeks. Highlights a

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging

ppc patch queue 2018-09-25

Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller

There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.

# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180925:
40p: add fixed IRQ routing for LSI SCSI device
lsi53c895a: add optional external IRQ via qdev
scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
scsi: add lsi53c8xx_handle_legacy_cmdline() function
sm501: Adjust endianness of pixel value in rectangle fill
spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
spapr: increase the size of the IRQ number space
spapr: introduce a spapr_irq class 'nr_msis' attribute
40p: use OR gate to wire up raven PCI interrupts
raven: some minor IRQ-related tidy-ups
hw/ppc: on 40p machine, change default firmware to OpenBIOS
target/ppc/cpu-models: Re-group the 970 CPUs together again
Record history of ppcemb target in common.json

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt

So that we don't have to call qdev_get_machine() to get the machine
class and the sPAPRIrq backend holding the number of MSIs.

Si

spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt

So that we don't have to call qdev_get_machine() to get the machine
class and the sPAPRIrq backend holding the number of MSIs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: introduce a spapr_irq class 'nr_msis' attribute

The number of MSI interrupts a sPAPR machine can allocate is in direct
relation with the number of interrupts of the sPAPRIrq backend. Define
s

spapr: introduce a spapr_irq class 'nr_msis' attribute

The number of MSI interrupts a sPAPR machine can allocate is in direct
relation with the number of interrupts of the sPAPRIrq backend. Define
statically this value at the sPAPRIrq class level and use it for the
"ibm,pe-total-#msi" property of the sPAPR PHB.

According to the PAPR specs, "ibm,pe-total-#msi" defines the maximum
number of MSIs that are available to the PE. We choose to advertise
the maximum number of MSIs that are available to the machine for
simplicity of the model and to avoid segmenting the MSI interrupt pool
which can be easily shared. If the pool limit is reached, it can be
extended dynamically.

Finally, remove XICS_IRQS_SPAPR which is now unused.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging

ppc patch queue 2018-09-07

Here's another pull request for qemu-3.1. No real theme here, just an
assortment of

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging

ppc patch queue 2018-09-07

Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.

# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: fix potential NULL pointer dereference

Commit 2c88b098e76fd added a call to SPAPR_MACHINE_GET_CLASS(spapr) in
spapr_phb_realize() before we check spapr isn't NULL. This causes QEMU
to cra

spapr_pci: fix potential NULL pointer dereference

Commit 2c88b098e76fd added a call to SPAPR_MACHINE_GET_CLASS(spapr) in
spapr_phb_realize() before we check spapr isn't NULL. This causes QEMU
to crash when starting a non-pseries machine with a sPAPR PHB.

This could be fixed by setting the smc variable after the null check,
but it seems more explicit to use a ternary operator to skip the call
to SPAPR_MACHINE_GET_CLASS() if spapr is NULL, since spapr_phb_realize()
will return immediately in this case.

This was reported by Coverity (CID 1395170 and 1395183).

Fixes: 2c88b098e76fde0c7fcc0476dd3f80ce58409505
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180821' into staging

ppc patch queue 2018-08-21

Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of thi

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180821' into staging

ppc patch queue 2018-08-21

Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller

# gpg: Signature made Tue 21 Aug 2018 05:32:44 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180821: (26 commits)
ppc: add DBCR based debugging
spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()
mac_newworld: don't use legacy fw_cfg_init_mem() function
mac_oldworld: don't use legacy fw_cfg_init_mem() function
40p: don't use legacy fw_cfg_init_mem() function
qemu-doc: mark ppc/prep machine as deprecated
hw/ppc: deprecate the machine type 'prep', replaced by '40p'
spapr: introduce a IRQ controller backend to the machine
hw/ppc/ppc405_uc: Convert away from old_mmio
hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga
hw/ppc/prep: Remove ifdeffed-out stub of XCSR code
spapr: introduce a fixed IRQ number space
spapr: Add a pseries-3.1 machine type
target/ppc: simplify bcdadd/sub functions
xics: don't include "target/ppc/cpu-qom.h" in "hw/ppc/xics.h"
vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
target/ppc: bcdsub fix sign when result is zero
target/ppc: Use non-arithmetic conversions for fp load/store
target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt
target/ppc: Tidy helper_fsqrt
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()

It should save us some CPU cycles as these routines perform a lot of
checks.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by:

spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()

It should save us some CPU cycles as these routines perform a lot of
checks.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: introduce a fixed IRQ number space

This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI

spapr: introduce a fixed IRQ number space

This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI IRQ numbers which are negotiated by the guest at
runtime.

As the VIO device model does not have a device index but a "reg"
property, we introduce a formula to compute an IRQ number from a "reg"
value. It should minimize most of the collisions.

The previous layout is kept in pre-3.1 machines raising the
'legacy_irq_allocation' machine class flag.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180622' into staging

ppc patch queue 2018-06-22

Another assorted patch of patches for ppc and spapr.
* Rework of guest pagesize

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180622' into staging

ppc patch queue 2018-06-22

Another assorted patch of patches for ppc and spapr.
* Rework of guest pagesize handling for ppc, which avoids guest
visibly different behaviour between accelerators
* A number of Pnv cleanups, working towards more complete POWER9
support
* Migration of VPA data, a significant bugfix

# gpg: Signature made Fri 22 Jun 2018 05:23:16 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180622: (23 commits)
spapr: Don't rewrite mmu capabilities in KVM mode
spapr: Limit available pagesizes to provide a consistent guest environment
target/ppc: Add ppc_hash64_filter_pagesizes()
spapr: Use maximum page size capability to simplify memory backend checking
spapr: Maximum (HPT) pagesize property
pseries: Update SLOF firmware image to qemu-slof-20180621
target/ppc: Add missing opcode for icbt on PPC440
ppc4xx_i2c: Implement directcntl register
ppc4xx_i2c: Remove unimplemented sdata and intr registers
sm501: Fix hardware cursor color conversion
fpu_helper.c: fix helper_fpscr_clrbit() function
spapr: remove unused spapr_irq routines
spapr: split the IRQ allocation sequence
target/ppc: Add kvmppc_hpt_needs_host_contiguous_pages() helper
spapr: Add cpu_apply hook to capabilities
spapr: Compute effective capability values earlier
target/ppc: Allow cpu compatiblity checks based on type, not instance
ppc/pnv: consolidate the creation of the ISA bus device tree
ppc/pnv: introduce Pnv8Chip and Pnv9Chip models
spapr_cpu_core: migrate VPA related state
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: split the IRQ allocation sequence

Today, when a device requests for IRQ number in a sPAPR machine, the
spapr_irq_alloc() routine first scans the ICSState status array to
find an empty slot an

spapr: split the IRQ allocation sequence

Today, when a device requests for IRQ number in a sPAPR machine, the
spapr_irq_alloc() routine first scans the ICSState status array to
find an empty slot and then performs the assignement of the selected
numbers. Split this sequence in two distinct routines : spapr_irq_find()
for lookups and spapr_irq_claim() for claiming the IRQ numbers.

This will ease the introduction of a static layout of IRQ numbers.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180612' into staging

ppc patch queue 2018-06-12

Here's another batch of ppc patches towards the 3.0 release. There's
a fair bit her

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180612' into staging

ppc patch queue 2018-06-12

Here's another batch of ppc patches towards the 3.0 release. There's
a fair bit here, because I've been working through my mail backlog
after a holiday. There's not much of a central theme, amongst other
things we have:
* ppc440 / sam460ex improvements
* logging and error cleanups
* 40p (PReP) bugfixes
* Macintosh fixes and cleanups
* Add emulation of the new POWER9 store-forwarding barrier
instruction variant
* Hotplug cleanups

# gpg: Signature made Tue 12 Jun 2018 07:43:21 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180612: (33 commits)
spapr_pci: Remove unhelpful pagesize warning
xics_kvm: use KVM helpers
ppc/pnv: fix LPC HC firmware address space
spapr: handle cpu core unplug via hotplug handler chain
spapr: handle pc-dimm unplug via hotplug handler chain
spapr: introduce machine unplug handler
spapr: move memory hotplug support check into spapr_memory_pre_plug()
spapr: move lookup of the node into spapr_memory_plug()
spapr: no need to verify the node
target/ppc: Allow PIR read in privileged mode
ppc4xx_i2c: Clean up and improve error logging
target/ppc: extend eieio for POWER9
mos6522: convert VMSTATE_TIMER_PTR_TEST to VMSTATE_TIMER_PTR
mos6522: move timer frequency initialisation to mos6522_reset
cuda: embed mos6522_cuda device directly rather than using QOM object link
mos6522: fix vmstate_mos6522_timer version in vmstate_mos6522
ppc: add missing FW_CFG_PPC_NVRAM_FLAT definition
ppc: remove obsolete macio_init() definition from mac.h
ppc: remove obsolete pci_pmac_init() definitions from mac.h
hw/misc/mos6522: Add trailing '\n' to qemu_log() calls
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: Remove unhelpful pagesize warning

By default, the IOMMU model built into the spapr virtual PCI host bridge
supports 4kiB and 64kiB IOMMU page sizes. However this can be overridden
which

spapr_pci: Remove unhelpful pagesize warning

By default, the IOMMU model built into the spapr virtual PCI host bridge
supports 4kiB and 64kiB IOMMU page sizes. However this can be overridden
which may be desirable to allow larger IOMMU page sizes when running a
guest with hugepage backing and passthrough devices. For that reason a
warning was printed when the device wasn't configured to allow the pagesize
with which guest RAM is backed.

Experience has proven, however, that this message is more confusing than
useful. Worse it sometimes makes little sense when the host-available page
sizes don't match those available on the guest, which can happen with
a POWER8 guest running on a POWER9 KVM host.

Long term we do want better handling to allow large IOMMU page sizes to be
used, but for now this parameter and warning don't really accomplish it.
So, remove the message, pending a better solution.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180129' into staging

ppc patch queue 2018-01-29

Here's another batch of patches for ppc, spapr and related things.
Higlights:

*

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180129' into staging

ppc patch queue 2018-01-29

Here's another batch of patches for ppc, spapr and related things.
Higlights:

* Implement (with a bunch of necessary infrastructure) a hypercall
to let guests properly apply Spectre and Meltdown workarounds.
* Convert a number of old devices to trace events
* Fix some bugs

# gpg: Signature made Mon 29 Jan 2018 03:27:30 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20180129:
target/ppc/spapr: Add H-Call H_GET_CPU_CHARACTERISTICS
target/ppc/spapr_caps: Add new tristate cap safe_indirect_branch
target/ppc/spapr_caps: Add new tristate cap safe_bounds_check
target/ppc/spapr_caps: Add new tristate cap safe_cache
target/ppc/spapr_caps: Add support for tristate spapr_capabilities
target/ppc/kvm: Add cap_ppc_safe_[cache/bounds_check/indirect_branch]
spapr_pci: fix MSI/MSIX selection
input: add missing newline from trace-events
uninorth: convert to trace-events
grackle: convert to trace-events
ppc: Deprecate qemu-system-ppcemb
ppc/pnv: fix PnvChip redefinition in <hw/ppc/pnv_xscom.h>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: fix MSI/MSIX selection

In various place we don't correctly check if the device supports MSI or
MSI-X. This can cause devices to be advertised with MSI support, even
if they only support M

spapr_pci: fix MSI/MSIX selection

In various place we don't correctly check if the device supports MSI or
MSI-X. This can cause devices to be advertised with MSI support, even
if they only support MSI-X (like virtio-pci-* devices for example):

ethernet@0 {
ibm,req#msi = <0x1>; <--- wrong!
.
ibm,loc-code = "qemu_virtio-net-pci:0000:00:00.0";
.
ibm,req#msi-x = <0x3>;
};

Worse, this can also cause the "ibm,change-msi" RTAS call to corrupt the
PCI status and cause migration to fail:

qemu-system-ppc64: get_pci_config_device: Bad config data: i=0x6
read: 0 device: 10 cmask: 10 wmask: 0 w1cmask:0
^^
PCI_STATUS_CAP_LIST bit which is assumed to be constant

This patch changes spapr_populate_pci_child_dt() to properly check for
MSI support using msi_present(): this ensures that PCIDevice::msi_cap
was set by msi_init() and that msi_nr_vectors_allocated() will look at
the right place in the config space.

Checking PCIDevice::msix_entries_nr is enough for MSI-X but let's add
a call to msix_present() there as well for consistency.

It also changes rtas_ibm_change_msi() to select the appropriate MSI
type in Function 1 instead of always selecting plain MSI. This new
behaviour is compliant with LoPAPR 1.1, as described in "Table 71.
ibm,change-msi Argument Call Buffer":

Function 1: If Number Outputs is equal to 3, request to set to a new
number of MSIs (including set to 0).
If the “ibm,change-msix-capable” property exists and Number
Outputs is equal to 4, request is to set to a new number of
MSI or MSI-X (platform choice) interrupts (including set to
0).

Since MSI is the the platform default (LoPAPR 6.2.3 MSI Option), let's
check for MSI support first.

And finally, it checks the input parameters are valid, as described in
LoPAPR 1.1 "R1–7.3.10.5.1–3":

For the MSI option: The platform must return a Status of -3 (Parameter
error) from ibm,change-msi, with no change in interrupt assignments if
the PCI configuration address does not support MSI and Function 3 was
requested (that is, the “ibm,req#msi” property must exist for the PCI
configuration address in order to use Function 3), or does not support
MSI-X and Function 4 is requested (that is, the “ibm,req#msi-x” property
must exist for the PCI configuration address in order to use Function 4),
or if neither MSIs nor MSI-Xs are supported and Function 1 is requested.

This ensures that the ret_intr_type variable contains a valid MSI type
for this device, and that spapr_msi_setmsg() won't corrupt the PCI status.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, pci, virtio: features, fixes, cleanups

A bunch of fixes, cleanus and new features all over the place.

Signed-off-by: M

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, pci, virtio: features, fixes, cleanups

A bunch of fixes, cleanus and new features all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 11 Jan 2018 20:04:57 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (23 commits)
smbus: do not immediately complete commands
dump-guest-memory.py: fix "You can't do that without a process to debug"
virtio-pci: Don't force Subsystem Vendor ID = Vendor ID
intel_iommu: fix error param in string
intel_iommu: remove X86_IOMMU_PCI_DEVFN_MAX
vhost-user: document memory accesses
vhost-user: fix indentation in protocol specification
hw/pci-host/xilinx: QOM'ify the AXI-PCIe host bridge
hw/pci-host/piix: QOM'ify the IGD Passthrough host bridge
tests/pxe-test: Add some extra tests
tests/pxe-test: Test net booting over IPv6 in some cases
tests/pxe-test: Use table of testcases rather than open-coding
tests/pxe-test: Remove unnecessary special case test functions
virtio_error: don't invoke status callbacks
pci: Eliminate pci_find_primary_bus()
pci: Eliminate redundant PCIDevice::bus pointer
pci: Add pci_dev_bus_num() helper
pci: Move bridge data structures from pci_bus.h to pci_bridge.h
pci: Rename root bus initialization functions for clarity
tests: add test to check VirtQueue object
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'origin/master' into HEAD

Resolve conflicts around apb.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180111' into staging

ppc patch queue 2018-01-11

This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earl

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180111' into staging

ppc patch queue 2018-01-11

This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earlier pull request included a patch which exposed a bug in
the ARM TCG backend. I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).

Higlights from this series:
* SLOF update
* Several new devices for embedded platforms
* Fix to correctly set compatiblity mode for hotplugged CPUs
* dtc compile fix for older MacOS versions

# gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20180111:
spapr: Correct compatibility mode setting for hotplugged CPUs
hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device
Update dtc to fix compilation problem on Mac OS 10.6
target/ppc: more use of the PPC_*() macros
ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency
hw/ide: Emulate SiI3112 SATA controller
spapr_pci: use warn_report()
ppc4xx_i2c: Implement basic I2C functions
sm501: Add some more unimplemented registers
sm501: Add panel hardware cursor registers also to read function
pseries: Update SLOF firmware image to qemu-slof-20171214

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr_pci: use warn_report()

These two are definitely warnings. Let's use the appropriate API.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20171215' into staging

ppc patch queue 2017-12-15

First pull request for qemu-2.12. This has quite a bit of stuff
accumulated while

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20171215' into staging

ppc patch queue 2017-12-15

First pull request for qemu-2.12. This has quite a bit of stuff
accumulated while 2.11 was finalizing. Highlights are:

* Some preliminary work towards implementing the "XIVE" POWER9
interrupt controller
* Some fixes for problems during reboot with MTTCG
* A substantial TCG performance improvement via
tcg_get_lookup_and_goto_ptr
* Numerous assorted cleanups and bugfixes that weren't urgent enough
for 2.11

# gpg: Signature made Fri 15 Dec 2017 03:14:12 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20171215: (24 commits)
spapr: don't initialize PATB entry if max-cpu-compat < power9
spapr: Assume msi_nonbroken
spapr: Rename machine init functions for clarity
target/ppc: introduce the PPC_BIT() macro
spapr_events: drop bogus cell from "interrupt-ranges" property
spapr: fix LSI interrupt specifiers in the device tree
spapr: replace numa_get_node() with lookup in pc-dimm list
spapr: introduce a spapr_qirq() helper
spapr: introduce a spapr_irq_set_lsi() helper
spapr: move the IRQ allocation routines under the machine
ppc/xics: assign of the CPU 'intc' pointer under the core
ppc/xics: introduce an icp_create() helper
spapr/rtas: do not reset the MSR in stop-self command
spapr/rtas: fix reboot of a a SMP TCG guest
spapr/rtas: disable the decrementer interrupt when a CPU is unplugged
e500: fix pci host bridge class/type
openpic: debug w/ info_report()
pcc: define the Power-saving mode Exit Cause Enable bits in PowerPCCPUClass
nvram: add AT24Cx i2c eeprom
e500: name openpic and pci host bridge
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: fix LSI interrupt specifiers in the device tree

LoPAPR 1.1 B.6.9.1.2 describes the "#interrupt-cells" property of the
PowerPC External Interrupt Source Controller node as follows:

“#interrup

spapr: fix LSI interrupt specifiers in the device tree

LoPAPR 1.1 B.6.9.1.2 describes the "#interrupt-cells" property of the
PowerPC External Interrupt Source Controller node as follows:

“#interrupt-cells”

Standard property name to define the number of cells in an interrupt-
specifier within an interrupt domain.

prop-encoded-array: An integer, encoded as with encode-int, that denotes
the number of cells required to represent an interrupt specifier in its
child nodes.

The value of this property for the PowerPC External Interrupt option shall
be 2. Thus all interrupt specifiers (as used in the standard “interrupts”
property) shall consist of two cells, each containing an integer encoded
as with encode-int. The first integer represents the interrupt number the
second integer is the trigger code: 0 for edge triggered, 1 for level
triggered.

This patch fixes the interrupt specifiers in the "interrupt-map" property
of the PHB node, that were setting the second cell to 8 (confusion with
IRQ_TYPE_LEVEL_LOW ?) instead of 1.

VIO devices and RTAS event sources use the same format for interrupt
specifiers: while here, we introduce a common helper to handle the
encoding details.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
--
v3: - reference public LoPAPR instead of internal PAPR+ in changelog
- change helper name to spapr_dt_xics_irq()

v2: - drop the erroneous changes to the "interrupts" prop in PCI device nodes
- introduce a common helper to encode interrupt specifiers
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: introduce a spapr_qirq() helper

xics_get_qirq() is only used by the sPAPR machine. Let's move it there
and change its name to reflect its scope. It will be useful for XIVE
support which will

spapr: introduce a spapr_qirq() helper

xics_get_qirq() is only used by the sPAPR machine. Let's move it there
and change its name to reflect its scope. It will be useful for XIVE
support which will use its own set of qirqs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...