Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
hw/arm: ast2600: Fix address mapping of second SPI controller
hw/intc/arm_gicv3_its: Implement MOVI
hw/intc/arm_gicv3_its: Implement MOVALL
hw/intc/arm_gicv3_its: Check table bounds against correct limit
hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
hw/intc/arm_gicv3_its: Add tracepoints
target/arm: Log CPU index in 'Taking exception' log
scripts: Explain the difference between linux-headers and standard-headers
MAINTAINERS: Remove myself (for raspi).
MAINTAINERS: Add an entry for Xilinx Versal OSPI
hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

rtc: Move RTC function prototypes to their own header

softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-co

rtc: Move RTC function prototypes to their own header

softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.

Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.

The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210930' into staging

target-arm queue:
* allwinner-h3: Switch to SMC as PSCI conduit
* arm: tcg: Adhere to SMCCC 1.3 section 5

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210930' into staging

target-arm queue:
* allwinner-h3: Switch to SMC as PSCI conduit
* arm: tcg: Adhere to SMCCC 1.3 section 5.2
* xlnx-zcu102, xlnx-versal-virt: Support BBRAM and eFUSE devices
* gdbstub related code cleanups
* Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
* Use _init vs _new convention in bus creation function names
* sabrelite: Connect SPI flash CS line to GPIO3_19

# gpg: Signature made Thu 30 Sep 2021 16:11:20 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210930: (22 commits)
hw/arm: sabrelite: Connect SPI flash CS line to GPIO3_19
ide: Rename ide_bus_new() to ide_bus_init()
qbus: Rename qbus_create() to qbus_new()
qbus: Rename qbus_create_inplace() to qbus_init()
pci: Rename pci_root_bus_new_inplace() to pci_root_bus_init()
ipack: Rename ipack_bus_new_inplace() to ipack_bus_init()
scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()
target/arm: Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
target/arm: Move gdbstub related code out of helper.c
target/arm: Fix coding style issues in gdbstub code in helper.c
configs: Don't include 32-bit-only GDB XML in aarch64 linux configs
docs/system/arm: xlnx-versal-virt: BBRAM and eFUSE Usage
hw/arm: xlnx-zcu102: Add Xilinx eFUSE device
hw/arm: xlnx-zcu102: Add Xilinx BBRAM device
hw/arm: xlnx-versal-virt: Add Xilinx eFUSE device
hw/arm: xlnx-versal-virt: Add Xilinx BBRAM device
hw/nvram: Introduce Xilinx battery-backed ram
hw/nvram: Introduce Xilinx ZynqMP eFuse device
hw/nvram: Introduce Xilinx Versal eFuse device
hw/nvram: Introduce Xilinx eFuse QOM
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qbus: Rename qbus_create_inplace() to qbus_init()

Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.

qbus: Rename qbus_create_inplace() to qbus_init()

Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

x86 and machine queue, 2020-09-02

Bug fixes:
* Revert EPYC topology patches that caused regressions
(Ba

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

x86 and machine queue, 2020-09-02

Bug fixes:
* Revert EPYC topology patches that caused regressions
(Babu Moger)
* Memory leak fixes (Pan Nengyuan)

QOM Cleanups:
* Fix typo in AARCH64_CPU_GET_CLASS
* Rename QOM macros for consistency and/or to avoid
conflicts with other symbols
* Move typedefs to header files
* Correct instance/class sizes

# gpg: Signature made Wed 02 Sep 2020 12:49:57 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
target/i386/sev: Plug memleak in sev_read_file_base64
target/i386/cpu: Fix memleak in x86_cpu_class_check_missing_features
virtio: add Virtio*BusClass sizes
Revert "hw/i386: Update structures to save the number of nodes per package"
Revert "hw/386: Add EPYC mode topology decoding functions"
Revert "target/i386: Cleanup and use the EPYC mode topology functions"
Revert "hw/i386: Introduce apicid functions inside X86MachineState"
Revert "i386: Introduce use_epyc_apic_id_encoding in X86CPUDefinition"
Revert "hw/i386: Move arch_id decode inside x86_cpus_init"
Revert "target/i386: Enable new apic id encoding for EPYC based cpus models"
Revert "i386: Fix pkg_id offset for EPYC cpu models"
tls-cipher-suites: Correct instance_size
hda-audio: Set instance_size at base class
rx: Move typedef RXCPU to cpu-qom.h
rx: Rename QOM type check macros
arm: Fix typo in AARCH64_CPU_GET_CLASS definition
rdma: Rename INTERFACE_RDMA_PROVIDER_CLASS macro
x86-iommu: Rename QOM type macros
mos6522: Rename QOM macros
imx_ccm: Rename IMX_GET_CLASS macro

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

mos6522: Rename QOM macros

Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS
macros to be consistent with the TYPE_MOS6522 and MOS6522 macros.

This will make future conversion to OBJECT_

mos6522: Rename QOM macros

Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS
macros to be consistent with the TYPE_MOS6522 and MOS6522 macros.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-07-v2' into staging

Error reporting patches patches for 2020-07-07

# gpg: Signature made Fri 10 Jul 2020 14:24:42 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-07-v2' into staging

Error reporting patches patches for 2020-07-07

# gpg: Signature made Fri 10 Jul 2020 14:24:42 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2020-07-07-v2: (53 commits)
xen: Use ERRP_GUARD()
nbd: Use ERRP_GUARD()
virtio-9p: Use ERRP_GUARD()
fw_cfg: Use ERRP_GUARD()
pflash: Use ERRP_GUARD()
sd: Use ERRP_GUARD()
scripts: Coccinelle script to use ERRP_GUARD()
error: New macro ERRP_GUARD()
hmp: Ignore Error objects where the return value suffices
qdev: Ignore Error objects where the return value suffices
qemu-img: Ignore Error objects where the return value suffices
error: Avoid error_propagate() after migrate_add_blocker()
qapi: Purge error_propagate() from QAPI core
qapi: Smooth visitor error checking in generated code
qapi: Smooth another visitor error checking pattern
block/parallels: Simplify parallels_open() after previous commit
error: Reduce unnecessary error propagation
error: Eliminate error_propagate() manually
error: Eliminate error_propagate() with Coccinelle, part 2
error: Eliminate error_propagate() with Coccinelle, part 1
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

error: Eliminate error_propagate() with Coccinelle, part 1

When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right

error: Eliminate error_propagate() with Coccinelle, part 1

When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert

if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}

to

if (!foo(..., errp)) {
...
...
return ...
}

where nothing else needs @err. Coccinelle script:

@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}

@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}

@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.

Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>

show more ...

qdev: Use returned bool to check for qdev_realize() etc. failure

Convert

foo(..., &err);
if (err) {
...
}

to

if (!foo(..., &err)) {
...
}

for qdev_realize(),

qdev: Use returned bool to check for qdev_realize() etc. failure

Convert

foo(..., &err);
if (err) {
...
}

to

if (!foo(..., &err)) {
...
}

for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their
wrappers isa_realize_and_unref(), pci_realize_and_unref(),
sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref().
Coccinelle script:

@@
identifier fun = {
isa_realize_and_unref, pci_realize_and_unref, qbus_realize,
qdev_realize, qdev_realize_and_unref, sysbus_realize,
sysbus_realize_and_unref, usb_realize_and_unref
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Nothing to convert there; skipped.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Converted manually.

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-5-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20200626' into staging

qemu-macppc patches

# gpg: Signature made Fri 26 Jun 2020 10:15:36 BST
# gpg: using RSA key CC6

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20200626' into staging

qemu-macppc patches

# gpg: Signature made Fri 26 Jun 2020 10:15:36 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-macppc-20200626: (22 commits)
adb: add ADB bus trace events
adb: use adb_device prefix for ADB device trace events
adb: only call autopoll callbacks when autopoll is not blocked
mac_via: rework ADB state machine to be compatible with both MacOS and Linux
mac_via: move VIA1 portB write logic into mos6522_q800_via1_write()
pmu: add adb_autopoll_block() and adb_autopoll_unblock() functions
cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions
adb: add autopoll_blocked variable to block autopoll
adb: use adb_request() only for explicit requests
adb: add status field for holding information about the last ADB request
adb: keep track of devices with pending data
adb: introduce new ADBDeviceHasData method to ADBDeviceClass
mac_via: convert to use ADBBusState internal autopoll variables
pmu: convert to use ADBBusState internal autopoll variables
cuda: convert to use ADBBusState internal autopoll variables
adb: create autopoll variables directly within ADBBusState
adb: introduce realize/unrealize and VMStateDescription for ADB bus
pmu: honour autopoll_rate_ms when rearming the ADB autopoll timer
pmu: fix duplicate autopoll mask variable
cuda: convert ADB autopoll timer from ns to ms
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions

Ensure that the CUDA buffer is protected from autopoll requests overwriting
its contents whilst existing CUDA requests are in prog

cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions

Ensure that the CUDA buffer is protected from autopoll requests overwriting
its contents whilst existing CUDA requests are in progress.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-17-mark.cave-ayland@ilande.co.uk>

show more ...

cuda: convert to use ADBBusState internal autopoll variables

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivi

cuda: convert to use ADBBusState internal autopoll variables

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-9-mark.cave-ayland@ilande.co.uk>

show more ...

cuda: convert ADB autopoll timer from ns to ms

This is in preparation for consolidating all of the ADB autopoll management
in one place.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.

cuda: convert ADB autopoll timer from ns to ms

This is in preparation for consolidating all of the ADB autopoll management
in one place.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-4-mark.cave-ayland@ilande.co.uk>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-06-15: (84 commits)
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
qdev: qdev_init_nofail() is now unused, drop
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
qdev: Use qdev_realize() in qdev_device_add()
qdev: Make qdev_realize() support bus-less devices
s390x/event-facility: Simplify creation of SCLP event devices
microbit: Eliminate two local variables in microbit_init()
sysbus: sysbus_init_child_obj() is now unused, drop
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
qdev: Drop qdev_realize() support for null bus
sysbus: Convert to sysbus_realize() etc. with Coccinelle
sysbus: New sysbus_realize(), sysbus_realize_and_unref()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2
hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
microbit: Tidy up sysbus_init_child_obj() @child argument
sysbus: Drop useless OBJECT() in sysbus_init_child_obj() calls
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2

This is the same transformation as in the previous commit, except
sysbus_init_child_obj() and realize are too separated for the comm

sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2

This is the same transformation as in the previous commit, except
sysbus_init_child_obj() and realize are too separated for the commit's
Coccinelle script to handle, typically because sysbus_init_child_obj()
is in a device's instance_init() method, and the matching realize is
in its realize() method.

Perhaps a Coccinelle wizard could make it transform that pattern, but
I'm just a bungler, and the best I can do is transforming the two
separate parts separately:

@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(OBJECT(child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!

@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(child, true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!

@@
expression child;
@@
- qdev_init_nofail(DEVICE(child));
+ sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!

@@
expression child;
expression dev;
@@
dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!

@@
expression child;
identifier dev;
@@
DeviceState *dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!

@@
expression parent, name, size, type;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);

@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
+ object_initialize_child(parent, propname, child, type)

@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
+ object_initialize_child(parent, propname, &child, type)

This script is *unsound*: we need to manually verify init and realize
conversions are properly paired.

This commit has only the pairs where object_initialize_child()'s
@child and sysbus_realize()'s @dev argument text match exactly within
the same source file.

Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-49-armbru@redhat.com>

show more ...

macio: Fix to realize "mos6522-cuda" and "mos6522-pmu" devices

cuda_init() creates a "mos6522-cuda" device, but it's never realized.
Affects machines mac99 with via=cuda (default) and g3beige.

pmu_

macio: Fix to realize "mos6522-cuda" and "mos6522-pmu" devices

cuda_init() creates a "mos6522-cuda" device, but it's never realized.
Affects machines mac99 with via=cuda (default) and g3beige.

pmu_init() creates a "mos6522-pmu" device, but it's never realized.
Affects machine mac99 with via=pmu and via=pmu-adb,

In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect
to realize it.

These two appear to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.

Fix by realizing them in cuda_realize() and pmu_realize(),
respectively.

Fixes: 6dca62a0000f95e0b7020aa00d0ca9b2c421f341
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200609122339.937862-10-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Twe

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)

# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: set properties with device_class_set_props()

The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macr

qdev: set properties with device_class_set_props()

The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sysemu: Split sysemu/runstate.h off sysemu/sysemu.h

sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:

* It's included widely: in my "build ev

sysemu: Split sysemu/runstate.h off sysemu/sysemu.h

sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:

* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]

show more ...

Include hw/qdev-properties.h less

In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend

Include hw/qdev-properties.h less

In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>

show more ...

Include hw/hw.h exactly where needed

In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/o

Include hw/hw.h exactly where needed

In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Include migration/vmstate.h less

In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend o

Include migration/vmstate.h less

In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-06-11-v3:
MAINTAINERS: Polish headline decorations
MAINTAINERS: Improve section headlines
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
Clean up a header guard symbols (again)
Supply missing header guards
Clean up a few header guard symbols
scripts/clean-header-guards: Fix handling of trailing comments
Normalize position of header guard
Include qemu-common.h exactly where needed
Include qemu/module.h where needed, drop it from qemu-common.h
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include qemu-common.h exactly where needed

No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Me

Include qemu-common.h exactly where needed

No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]

show more ...