Include hw/qdev-properties.h less

In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend

Include hw/qdev-properties.h less

In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>

show more ...

Include hw/hw.h exactly where needed

In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/o

Include hw/hw.h exactly where needed

In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Include migration/vmstate.h less

In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend o

Include migration/vmstate.h less

In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Include hw/irq.h a lot less

In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

Include hw/irq.h a lot less

In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-06-11-v3:
MAINTAINERS: Polish headline decorations
MAINTAINERS: Improve section headlines
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
Clean up a header guard symbols (again)
Supply missing header guards
Clean up a few header guard symbols
scripts/clean-header-guards: Fix handling of trailing comments
Normalize position of header guard
Include qemu-common.h exactly where needed
Include qemu/module.h where needed, drop it from qemu-common.h
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts res

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]

show more ...

shutdown: Add source information to SHUTDOWN and RESET

Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn

shutdown: Add source information to SHUTDOWN and RESET

Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.

Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

hw: explicitly include qemu/log.h

Move the inclusion out of hw/hw.h, most files do not need it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND

This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then

Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND

This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.

For example,

timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));

NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.

Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/misc: Clean up includes

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-o

hw/misc: Clean up includes

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-25-git-send-email-peter.maydell@linaro.org

show more ...

hw/misc/arm_sysctl: Fix bad boundary check on mb clock accesses

Fix incorrect use of sizeof() rather than ARRAY_SIZE() to guard
accesses into the mb_clock[] array, which was allowing a malicious
gue

hw/misc/arm_sysctl: Fix bad boundary check on mb clock accesses

Fix incorrect use of sizeof() rather than ARRAY_SIZE() to guard
accesses into the mb_clock[] array, which was allowing a malicious
guest to overwrite the end of the array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org

show more ...

aio / timers: Switch entire codebase to the new timer API

This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may

aio / timers: Switch entire codebase to the new timer API

This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

arm_sysctl: QOM cast cleanup

Signed-off-by: Andreas Färber <afaerber@suse.de>

hw/m*: pass owner to memory_region_init* functions

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

memory: add owner argument to initialization functions

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw: move other devices to hw/misc/, configure with default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it n

hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/arm_sysctl: Implement SYS_CFG_OSC function

Implement the SYS_CFG_OSC function. Since the idea of
programmable clock rates doesn't make much sense for QEMU,
we simply allow the clock rate to be re

hw/arm_sysctl: Implement SYS_CFG_OSC function

Implement the SYS_CFG_OSC function. Since the idea of
programmable clock rates doesn't make much sense for QEMU,
we simply allow the clock rate to be read back as written.
The number and value of the daughterboard oscillators varies
between daughterboards, so we provide an array property to
allow their reset values to be configured.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm_sysctl: Implement SYS_CFG_VOLT

Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. Since
QEMU implements a perfectly stable pow

hw/arm_sysctl: Implement SYS_CFG_VOLT

Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. Since
QEMU implements a perfectly stable power supply these registers
always return a constant value. The number and value of the
daughterboard voltages is dependent on the specific daughterboard,
so we use a property array to allow the board to configure them
appropriately.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm_sysctl: Convert from qdev init to instance_init

Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, though.

Signed-off-by: Peter

hw/arm_sysctl: Convert from qdev init to instance_init

Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, though.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm_sysctl: Implement SYS_CFG_DVIMODE as a no-op

SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this makes no difference to QEMU, i

hw/arm_sysctl: Implement SYS_CFG_DVIMODE as a no-op

SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this makes no difference to QEMU, implement writes as a
no-op so Linux doesn't complain.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm_sysctl: Implement SYS_CFG_MUXFPGA writes as a no-op

SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller or the daughterboard'

hw/arm_sysctl: Implement SYS_CFG_MUXFPGA writes as a no-op

SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller or the daughterboard's one. Since QEMU doesn't
currently support selecting the video output like this,
implement as a no-op, so Linux doesn't complain about
the register not being implemented.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm_sysctl: Handle SYS_CFGCTRL in a more structured way

The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/write bit. Refactor th

hw/arm_sysctl: Handle SYS_CFGCTRL in a more structured way

The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/write bit. Refactor the code handling SYS_CFGCTRL
writes to make it easier to add support for functions
like SYS_CFG_OSC which support multiple device fields.
We also pull the handling out into its own function for
clarity, as there are potentially a lot of implementable
subfunctions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `fin

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/arm_sysctl: Clear sysctl cfgctrl start bit

The start bit should only be set to indicate that a function call is
underway, right now. When done with function, clear it.

Signed-off-by: Christoffe

hw/arm_sysctl: Clear sysctl cfgctrl start bit

The start bit should only be set to indicate that a function call is
underway, right now. When done with function, clear it.

Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...