hw/sm501: Use correct setter for sysbus-ohci dma-address property

The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.

Signed-off-by:

hw/sm501: Use correct setter for sysbus-ohci dma-address property

The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

show more ...

console: add GraphicHwOps

Pass a single GraphicHwOps struct pointer to graphic_console_init,
instead of a bunch of function pointers.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

console: simplify screendump

Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface con

console: simplify screendump

Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface content into
a ppm file. Done.

No console switching needed. No special support code in the
gfx card emulation needed. Zap it all. Also move ppm_save
out of the vga code and next to the qmp_screendump function.

For now screen dumping is limited to console #0 (like it used
to be), even though it is dead simple to extend it to other
consoles. I wanna finish the console cleanup before setting
new qapi interfaces into stone.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>

show more ...

arm: fix location of some include files

The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/

Move these

arm: fix location of some include files

The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/

Move these two headers to correct this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw: move private headers to hw/ subdirectories.

Many headers are used only in a single directory. These can be
kept in hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw: move display devices to hw/display/, configure via default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it n

hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

console: stop using DisplayState in gfx hardware emulation

Use QemuConsole instead. Updates interfaces in console.[ch] and adapts
gfx hardware emulation code.

Signed-off-by: Gerd Hoffmann <kraxel@

console: stop using DisplayState in gfx hardware emulation

Use QemuConsole instead. Updates interfaces in console.[ch] and adapts
gfx hardware emulation code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `fin

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

sysbus: Drop sysbus_from_qdev() cast macro

Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.

Resolve a Coding Style warning in ope

sysbus: Drop sysbus_from_qdev() cast macro

Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.

Resolve a Coding Style warning in openpic code.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

misc: move include files to include/qemu/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ui: move files to ui/ and include/ui/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

console: untangle gfx & txt updates

Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).

Add flags to displaystate indicating whenever text mode displ

console: untangle gfx & txt updates

Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).

Add flags to displaystate indicating whenever text mode display
(curses) or gfx mode displays (sdl, vnc, ...) are present.

Add separate displaychangelistener callbacks for text / gfx mode
resize & updates.

This allows to enable gfx and txt diplays at the same time and also
paves the way for more cleanups in the future.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Rename target_phys_addr_t to hwaddr

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are

Rename target_phys_addr_t to hwaddr

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

serial: split serial.c

Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter

serial: split serial.c

Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

Fix memory dirty getting API change fallout

Fix confusion in length calculation in commit
cd7a45c95ecf2404810f3c6becb7cb83c5010ad8.

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue S

Fix memory dirty getting API change fallout

Fix confusion in length calculation in commit
cd7a45c95ecf2404810f3c6becb7cb83c5010ad8.

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

show more ...

memory: change dirty getting API to take a size

Instead of each device knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwir

memory: change dirty getting API to take a size

Instead of each device knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

show more ...

sm501: Fix size of color_reg

color_reg is expected to hold 32 bit values, so it was too small.

This bug was reported by coverity:

hw/sm501.c:624:
result_independent_of_operands:
color_reg >> 16 is

sm501: Fix size of color_reg

color_reg is expected to hold 32 bit values, so it was too small.

This bug was reported by coverity:

hw/sm501.c:624:
result_independent_of_operands:
color_reg >> 16 is 0 regardless of the values of its operands.
This occurs as the bitwise first operand of '&'.

Cc: Shin-ichiro Kawasaki <kawasaki@juno.dti.ne.jp>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

show more ...

vmstate, memory: decouple vmstate from memory API

Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDe

vmstate, memory: decouple vmstate from memory API

Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.

Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.

Signed-off-by: Avi Kivity <avi@redhat.com>

show more ...

sm501: convert to memory API

Signed-off-by: Avi Kivity <avi@redhat.com>

sm501: Pass address_space_mem to sm501_init

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>

serial: Add MemoryRegion parameter to serial_mm_init

Remove the get_system_memory() call from serial_mm_init, pushing
it back into the callers. In many cases we already have the
system memory regio

serial: Add MemoryRegion parameter to serial_mm_init

Remove the get_system_memory() call from serial_mm_init, pushing
it back into the callers. In many cases we already have the
system memory region available.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>

show more ...

serial: Remove ioregister parameter from serial_mm_init

All callers passed 1.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>

serial: Use enum device_endian in serial_mm_init parameter

The use of DEVICE_NATIVE_ENDIAN cleans up lots of ifdefs in
many of the callers.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed

serial: Use enum device_endian in serial_mm_init parameter

The use of DEVICE_NATIVE_ENDIAN cleans up lots of ifdefs in
many of the callers.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>

show more ...

Use glib memory allocation and free functions

qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>