hw/arm: add versioning to sbsa-ref machine DT

The sbsa-ref machine is continuously evolving. Some of the changes we
want to make in the near future, to align with real components (e.g.
the GIC-700),

hw/arm: add versioning to sbsa-ref machine DT

The sbsa-ref machine is continuously evolving. Some of the changes we
want to make in the near future, to align with real components (e.g.
the GIC-700), will break compatibility for existing firmware.

Introduce two new properties to the DT generated on machine generation:
- machine-version-major
To be incremented when a platform change makes the machine
incompatible with existing firmware.
- machine-version-minor
To be incremented when functionality is added to the machine
without causing incompatibility with existing firmware.
to be reset to 0 when machine-version-major is incremented.

This versioning scheme is *neither*:
- A QEMU versioned machine type; a given version of QEMU will emulate
a given version of the platform.
- A reflection of level of SBSA (now SystemReady SR) support provided.

The version will increment on guest-visible functional changes only,
akin to a revision ID register found on a physical platform.

These properties are both introduced with the value 0.
(Hence, a machine where the DT is lacking these nodes is equivalent
to version 0.0.)

Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Radoslaw Biernacki <rad@semihalf.com>
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Define neoverse-n1

Enable the n1 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Messa

target/arm: Define neoverse-n1

Enable the n1 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Define cortex-a76

Enable the a76 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Messa

target/arm: Define cortex-a76

Enable the a76 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220208' into staging

target-arm queue:
* Fix handling of SVE ZCR_LEN when using VHE
* xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IR

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220208' into staging

target-arm queue:
* Fix handling of SVE ZCR_LEN when using VHE
* xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs
* Don't ever enable PSCI when booting guest in EL3
* Adhere to SMCCC 1.3 section 5.2
* highbank: Fix issues with booting SMP
* midway: Fix issues booting at all
* boot: Drop existing dtb /psci node rather than retaining it
* versal-virt: Always call arm_load_kernel()
* force flag recalculation when messing with DAIF
* hw/timer/armv7m_systick: Update clock source before enabling timer
* hw/arm/smmuv3: Fix device reset
* hw/intc/arm_gicv3_its: refactorings and minor bug fixes
* hw/sensor: Add lsm303dlhc magnetometer device

# gpg: Signature made Tue 08 Feb 2022 11:39:15 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220208: (39 commits)
hw/sensor: Add lsm303dlhc magnetometer device
hw/intc/arm_gicv3_its: Split error checks
hw/intc/arm_gicv3_its: Don't allow intid 1023 in MAPI/MAPTI
hw/intc/arm_gicv3_its: In MAPC with V=0, don't check rdbase field
hw/intc/arm_gicv3_its: Drop TableDesc and CmdQDesc valid fields
hw/intc/arm_gicv3_its: Make update_ite() use ITEntry
hw/intc/arm_gicv3_its: Pass ITE values back from get_ite() via a struct
hw/intc/arm_gicv3_its: Avoid nested ifs in get_ite()
hw/intc/arm_gicv3_its: Fix address calculation in get_ite() and update_ite()
hw/intc/arm_gicv3_its: Pass CTEntry to update_cte()
hw/intc/arm_gicv3_its: Keep CTEs as a struct, not a raw uint64_t
hw/intc/arm_gicv3_its: Pass DTEntry to update_dte()
hw/intc/arm_gicv3_its: Keep DTEs as a struct, not a raw uint64_t
hw/intc/arm_gicv3_its: Use address_space_map() to access command queue packets
hw/arm/smmuv3: Fix device reset
hw/timer/armv7m_systick: Update clock source before enabling timer
arm: force flag recalculation when messing with DAIF
hw/arm: versal-virt: Always call arm_load_kernel()
hw/arm/boot: Drop existing dtb /psci node rather than retaining it
hw/arm/boot: Drop nb_cpus field from arm_boot_info
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/boot: Drop nb_cpus field from arm_boot_info

We use the arm_boot_info::nb_cpus field in only one place, and that
place can easily get the number of CPUs locally rather than relying
on the boar

hw/arm/boot: Drop nb_cpus field from arm_boot_info

We use the arm_boot_info::nb_cpus field in only one place, and that
place can easily get the number of CPUs locally rather than relying
on the board code to have set the field correctly. (At least one
board, xlnx-versal-virt, does not set the field despite having more
than one CPU.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-16-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2

Merge tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily

# gpg: Signature made Wed 15 Dec 2021 02:39:37 AM PST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/acpi: add expected blob for VIOT test on virt machine
tests/acpi: add expected blobs for VIOT test on q35 machine
tests/acpi: add test case for VIOT
tests/acpi: allow updates of VIOT expected data files
hw/arm/virt: Use object_property_set instead of qdev_prop_set
hw/arm/virt: Reject instantiation of multiple IOMMUs
hw/arm/virt: Remove device tree restriction for virtio-iommu
hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu
hw/net: npcm7xx_emc fix missing queue_flush
target/arm: Correct calculation of tlb range invalidate length
hw/arm: Don't include qemu-common.h unnecessarily
target/rx/cpu.h: Don't include qemu-common.h
target/hexagon/cpu.h: don't include qemu-common.h
include/hw/i386: Don't include qemu-common.h in .h files
target/i386: Use assert() to sanity-check b1 in SSE decode
tests/tcg: Add arm and aarch64 pc alignment tests
target/arm: Suppress bp for exceptions with more priority
target/arm: Assert thumb pc is aligned
target/arm: Take an exception if PC is misaligned
target/arm: Split compute_fsr_fsc out of arm_deliver_fault
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/arm: Don't include qemu-common.h unnecessarily

A lot of C files in hw/arm include qemu-common.h when they don't
need anything from it. Drop the include lines.

omap1.c, pxa2xx.c and strongarm.c r

hw/arm: Don't include qemu-common.h unnecessarily

A lot of C files in hw/arm include qemu-common.h when they don't
need anything from it. Drop the include lines.

omap1.c, pxa2xx.c and strongarm.c retain the include because they
use it for the prototype of qemu_get_timedate().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211021' into staging

Introduce cpu topology support
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type err

Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211021' into staging

Introduce cpu topology support
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node

# gpg: Signature made Thu 21 Oct 2021 08:22:32 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* remotes/rth/tags/pull-arm-20211021:
tests/data/acpi/virt: Update the empty expected file for PPTT
hw/arm/virt-acpi-build: Generate PPTT table
tests/data/acpi/virt: Add an empty expected file for PPTT
hw/acpi/aml-build: Add PPTT table
hw/acpi/aml-build: Add Processor hierarchy node structure
hw/arm/virt: Add cpu-map to device tree
device_tree: Add qemu_fdt_add_path
hw/arm/virt: Only describe cpu topology since virt-6.2
bios-tables-test: Generate reference table for virt/DBG2
hw/arm/virt_acpi_build: Generate DBG2 table
tests/acpi: Add void table for virt/DBG2 bios-tables-test
hw/elf_ops.h: switch to ssize_t for elf loader return type
hw/arm/sbsa-ref: Fixed cpu type error message typo.
roms/edk2: Only initialize required submodules
roms/edk2: Only init brotli submodule to build BaseTools
hw/arm/virt: Don't create device-tree node for empty NUMA node
tests/acpi: Generate reference blob for IORT rev E.b
hw/arm/virt-acpi-build: IORT upgrade up to revision E.b
tests/acpi: Get prepared for IORT E.b revision upgrade

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/arm/sbsa-ref: Fixed cpu type error message typo.

Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Yanan Wang <wangyana

hw/arm/sbsa-ref: Fixed cpu type error message typo.

Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211008063604.670699-1-ishii.shuuichir@fujitsu.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210825' into staging

target-arm queue:
* More MVE emulation work
* Implement M-profile trapping on division by zero
* kvm: us

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210825' into staging

target-arm queue:
* More MVE emulation work
* Implement M-profile trapping on division by zero
* kvm: use RCU_READ_LOCK_GUARD() in kvm_arch_fixup_msi_route()
* hw/char/pl011: add support for sending break
* fsl-imx6ul: Instantiate SAI1/2/3 and ASRC as unimplemented devices
* hw/dma/pl330: Add memory region to replace default
* sbsa-ref: Rename SBSA_GWDT enum value
* fsl-imx7: Instantiate SAI1/2/3 as unimplemented devices
* docs: Document how to use gdb with unix sockets

# gpg: Signature made Wed 25 Aug 2021 11:34:50 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210825: (44 commits)
docs: Document how to use gdb with unix sockets
fsl-imx7: Instantiate SAI1/2/3 as unimplemented devices
sbsa-ref: Rename SBSA_GWDT enum value
hw/dma/pl330: Add memory region to replace default
fsl-imx6ul: Instantiate SAI1/2/3 and ASRC as unimplemented devices
hw/char/pl011: add support for sending break
target/arm: kvm: use RCU_READ_LOCK_GUARD() in kvm_arch_fixup_msi_route()
target/arm: Implement M-profile trapping on division by zero
target/arm: Re-indent sdiv and udiv helpers
target/arm: Implement MVE interleaving loads/stores
target/arm: Implement MVE scatter-gather immediate forms
target/arm: Implement MVE scatter-gather insns
target/arm: Implement MVE VCTP
target/arm: Implement MVE VPNOT
target/arm: Implement MVE VMOV to/from 2 general-purpose registers
target/arm: Implement MVE VMAXA, VMINA
target/arm: Implement MVE VQABS, VQNEG
target/arm: Implement MVE saturating doubling multiply accumulates
target/arm: Implement MVE VMLA
target/arm: Implement MVE VMLADAV and VMLSLDAV
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sbsa-ref: Rename SBSA_GWDT enum value

The SBSA_GWDT enum value conflicts with the SBSA_GWDT() QOM type
checking helper, preventing us from using a OBJECT_DEFINE* or
DEFINE_INSTANCE_CHECKER macro for

sbsa-ref: Rename SBSA_GWDT enum value

The SBSA_GWDT enum value conflicts with the SBSA_GWDT() QOM type
checking helper, preventing us from using a OBJECT_DEFINE* or
DEFINE_INSTANCE_CHECKER macro for the SBSA_GWDT() wrapper.

If I understand the SBSA 6.0 specification correctly, the signal
being connected to IRQ 16 is the WS0 output signal from the
Generic Watchdog. Rename the enum value to SBSA_GWDT_WS0 to be
more explicit and avoid the name conflict.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20210806023119.431680-1-ehabkost@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210802' into staging

target-arm queue:
* Add documentation of Arm 'mainstone', 'kzm', 'imx25-pdk' boards
* MAINTAINERS: Don't

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210802' into staging

target-arm queue:
* Add documentation of Arm 'mainstone', 'kzm', 'imx25-pdk' boards
* MAINTAINERS: Don't list Andrzej Zaborowski for various components
* docs: Remove stale TODO comments about license and version
* docs: Move licence/copyright from HTML output to rST comments
* docs: Format literal text correctly
* hw/arm/boot: Report error if there is no fw_cfg device in the machine
* docs: rSTify barrier.txt and bootindex.txt

# gpg: Signature made Mon 02 Aug 2021 12:57:31 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210802: (21 commits)
docs: Move user-facing barrier docs into system manual
ui/input-barrier: Move TODOs from barrier.txt to a comment
docs: Move the protocol part of barrier.txt into interop
docs: Move bootindex.txt into system section and rstify
hw/arm/boot: Report error if there is no fw_cfg device in the machine
docs/tools/virtiofsd.rst: Delete stray backtick
docs/about/removed-features: Fix markup error
docs: Format literals correctly
docs/system/arm/cpu-features.rst: Format literals correctly
docs/system/s390x/protvirt.rst: Format literals correctly
docs/devel: Format literals correctly
docs/devel/migration.rst: Format literals correctly
docs/devel/ebpf_rss.rst: Format literals correctly
docs/devel/build-system.rst: Correct typo in example code
docs/devel/build-system.rst: Format literals correctly
docs: Move licence/copyright from HTML output to rST comments
docs: Remove stale TODO comments about license and version
MAINTAINERS: Don't list Andrzej Zaborowski for various components
docs: Add documentation of Arm 'imx25-pdk' board
docs: Add documentation of Arm 'kzm' board
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/boot: Report error if there is no fw_cfg device in the machine

If the user provides both a BIOS/firmware image and also a guest
kernel filename, arm_setup_firmware_boot() will pass the
kernel

hw/arm/boot: Report error if there is no fw_cfg device in the machine

If the user provides both a BIOS/firmware image and also a guest
kernel filename, arm_setup_firmware_boot() will pass the
kernel image to the firmware via the fw_cfg device. However we
weren't checking whether there really was a fw_cfg device present,
and if there wasn't we would crash.

This crash can be provoked with a command line such as
qemu-system-aarch64 -M raspi3 -kernel /dev/null -bios /dev/null -display none

It is currently only possible on the raspi3 machine, because unless
the machine sets info->firmware_loaded we won't call
arm_setup_firmware_boot(), and the only machines which set that are:
* virt (has a fw-cfg device)
* sbsa-ref (checks itself for kernel_filename && firmware_loaded)
* raspi3 (crashes)

But this is an unfortunate beartrap to leave for future machine
model implementors, so we should handle this situation in boot.c.

Check in arm_setup_firmware_boot() whether the fw-cfg device exists
before trying to load files into it, and if it doesn't exist then
exit with a hopefully helpful error message.

Because we now handle this check in a machine-agnostic way, we
can remove the check from sbsa-ref.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/503
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210726163351.32086-1-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Do not include exec/address-spaces.h if it's not really necessary

Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <202104

Do not include exec/address-spaces.h if it's not really necessary

Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524

# gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sbsa-ref: add 'max' to list of allowed cpus

Let add 'max' cpu while work goes on adding newer CPU types than
Cortex-A72. This allows us to check SVE etc support.

Signed-off-by: Marcin Juszkiewicz <

sbsa-ref: add 'max' to list of allowed cpus

Let add 'max' cpu while work goes on adding newer CPU types than
Cortex-A72. This allows us to check SVE etc support.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210216150122.3830863-3-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sbsa-ref: remove cortex-a53 from list of supported cpus

Cortex-A53 supports 40bits of address space. sbsa-ref's memory starts
above this limit.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz

sbsa-ref: remove cortex-a53 from list of supported cpus

Cortex-A53 supports 40bits of address space. sbsa-ref's memory starts
above this limit.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20210216150122.3830863-2-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fix for NULL segments (Bin Meng)
* Support for 32768 CPUs on x86 without IOMMU (David)
* PDEP/PEXT fix and test

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fix for NULL segments (Bin Meng)
* Support for 32768 CPUs on x86 without IOMMU (David)
* PDEP/PEXT fix and testcase (myself)
* Remove bios_name and ram_size globals (myself)
* qemu_init rationalization (myself)
* Update kernel-doc (myself + upstream patches)
* Propagate MemTxResult across DMA and PCI functions (Philippe)
* Remove master/slave when applicable (Philippe)
* WHPX support for in-kernel irqchip (Sunil)

# gpg: Signature made Thu 10 Dec 2020 17:21:50 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (113 commits)
scripts: kernel-doc: remove unnecessary change wrt Linux
Revert "docs: temporarily disable the kernel-doc extension"
scripts: kernel-doc: use :c:union when needed
scripts: kernel-doc: split typedef complex regex
scripts: kernel-doc: fix typedef parsing
Revert "kernel-doc: Handle function typedefs that return pointers"
Revert "kernel-doc: Handle function typedefs without asterisks"
scripts: kernel-doc: try to use c:function if possible
scripts: kernel-doc: fix line number handling
scripts: kernel-doc: allow passing desired Sphinx C domain dialect
scripts: kernel-doc: don't mangle with parameter list
scripts: kernel-doc: fix typedef identification
scripts: kernel-doc: reimplement -nofunction argument
scripts: kernel-doc: fix troubles with line counts
scripts: kernel-doc: use a less pedantic markup for funcs on Sphinx 3.x
scripts: kernel-doc: make it more compatible with Sphinx 3.x
Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later"
Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments"
scripts: kernel-doc: add support for typedef enum
kernel-doc: add support for ____cacheline_aligned attribute
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

vl: extract softmmu/datadir.c

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

arm: remove bios_name

Get the firmware name from the MachineState object.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <a

arm: remove bios_name

Get the firmware name from the MachineState object.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201210' into staging

target-arm queue:
* hw/arm/smmuv3: Fix up L1STD_SPAN decoding
* xlnx-zynqmp: Support Xilinx ZynqMP CAN co

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201210' into staging

target-arm queue:
* hw/arm/smmuv3: Fix up L1STD_SPAN decoding
* xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers
* sbsa-ref: allow to use Cortex-A53/57/72 cpus
* Various minor code cleanups
* hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
* Implement more pieces of ARMv8.1M support

# gpg: Signature made Thu 10 Dec 2020 11:46:43 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201210: (36 commits)
hw/arm/armv7m: Correct typo in QOM object name
hw/intc/armv7m_nvic: Implement read/write for RAS register block
target/arm: Implement M-profile "minimal RAS implementation"
hw/intc/armv7m_nvic: Fix "return from inactive handler" check
target/arm: Implement CCR_S.TRD behaviour for SG insns
hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit
target/arm: Implement new v8.1M VLLDM and VLSTM encodings
target/arm: Implement new v8.1M NOCP check for exception return
target/arm: Implement v8.1M REVIDR register
target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures
target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry
hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M
target/arm: Implement FPCXT_S fp system register
target/arm: Factor out preserve-fp-state from full_vfp_access_check()
target/arm: Use new FPCR_NZCV_MASK constant
target/arm: Implement M-profile FPSCR_nzcvqc
target/arm: Implement VLDR/VSTR system register
target/arm: Move general-use constant expanders up in translate.c
target/arm: Refactor M-profile VMSR/VMRS handling
target/arm: Enforce M-profile VMRS/VMSR register restrictions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sbsa-ref: allow to use Cortex-A53/57/72 cpus

Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable
it for QEMU as well. A53 was already enabled there.

1. https://review.trustedfirm

sbsa-ref: allow to use Cortex-A53/57/72 cpus

Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable
it for QEMU as well. A53 was already enabled there.

1. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7117

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201120141705.246690-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
* raspi: add model of cprman clock manager
* sbsa-ref: add an SBSA generic watchdog d

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
* raspi: add model of cprman clock manager
* sbsa-ref: add an SBSA generic watchdog device
* arm/trace: Fix hex printing
* raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+
* hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly
* Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support
* hw/arm: fix min_cpus for xlnx-versal-virt platform
* hw/arm/highbank: Silence warnings about missing fallthrough statements
* linux-user: Support Aarch64 BTI
* Armv7M systick: fix corner case bugs by rewriting to use ptimer

# gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits)
hw/timer/armv7m_systick: Rewrite to use ptimers
hw/core/ptimer: Support ptimer being disabled by timer callback
hw/arm/sbsa-ref: add SBSA watchdog device
hw/watchdog: Implement SBSA watchdog device
hw/arm/bcm2835_peripherals: connect the UART clock
hw/char/pl011: add a clock input
hw/misc/bcm2835_cprman: add sane reset values to the registers
hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer
hw/misc/bcm2835_cprman: implement clock mux behaviour
hw/misc/bcm2835_cprman: add a clock mux skeleton implementation
hw/misc/bcm2835_cprman: implement PLL channels behaviour
hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation
hw/misc/bcm2835_cprman: implement PLLs behaviour
hw/misc/bcm2835_cprman: add a PLL skeleton implementation
hw/arm/raspi: add a skeleton implementation of the CPRMAN
hw/arm/raspi: fix CPRMAN base address
hw/core/clock: trace clock values in Hz instead of ns
hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro
arm/trace: Fix hex printing
hw/arm/raspi: Add the Raspberry Pi 3 model A+
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/sbsa-ref: add SBSA watchdog device

Included the newly implemented SBSA generic watchdog device model into
SBSA platform

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by:

hw/arm/sbsa-ref: add SBSA watchdog device

Included the newly implemented SBSA generic watchdog device model into
SBSA platform

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201027015927.29495-3-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...