Merge drm/drm-next into drm-xe-next

Sync to v6.8-rc1.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge v6.8-rc1 into drm-misc-fixes

Let's kickstart the 6.8 fix cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs

Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.

Core & protocols:

- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes

This improves TCP performances with many concurrent connections up
to 40%

- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks

- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination

- Refactor the TCP bind conflict code, shrinking related socket
structs

- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF

- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it

- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations

- Reduce extension header parsing overhead at GRO time

- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries

- Reorder nftables struct members, to keep data accessed by the
datapath first

- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer

- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)

- More data-race annotations

- Extend the diag interface to dump TCP bound-only sockets

- Conditional notification of events for TC qdisc class and actions

- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID

- Implement SMCv2.1 virtual ISM device support

- Add support for Batman-avd mulicast packet type

BPF:

- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes

- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload

- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y

- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques

- Support uid/gid options when mounting bpffs

- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id

- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext

- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter

- Support for VLAN tag in XDP hints

- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)

Misc:

- Support for parellel TC self-tests execution

- Increase MPTCP self-tests coverage

- Updated the bridge documentation, including several so-far
undocumented features

- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs

- Add TCP-AO self-tests

- Add kunit tests for both cfg80211 and mac80211

- Autogenerate Netlink families documentation from YAML spec

- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs

- A bunch of additional module descriptions fixes

- Catch incorrect freeing of pages belonging to a page pool

Driver API:

- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust

- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship

- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances

- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host

- Add support for ethtool symmetric-xor RSS hash

- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform

- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute

- Convert older drivers to platform remove callback returning void

- Add support for PHY package MMD read/write

New hardware / drivers:

- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY

- Bluetooth:
- IMC Networks Bluetooth radio

Removed:

- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver

Driver updates:

- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload

- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation

- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode

- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support

- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support

- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels

- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
bpf-next-for-netdev
The following pull-request contains BPF updates

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.

We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).

The main changes are:

1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.

These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL

2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.

3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.

4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.

5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.

6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.

7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.

8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'bpf-support-to-track-bpf_jne'

Menglong Dong says:

====================
bpf: support to track BPF_JNE

For now, the reg bounds is not handled for BPF_JNE case, which can cause
the fail

Merge branch 'bpf-support-to-track-bpf_jne'

Menglong Dong says:

====================
bpf: support to track BPF_JNE

For now, the reg bounds is not handled for BPF_JNE case, which can cause
the failure of following case:

/* The type of "a" is u32 */
if (a > 0 && a < 100) {
/* the range of the register for a is [0, 99], not [1, 99],
* and will cause the following error:
*
* invalid zero-sized read
*
* as a can be 0.
*/
bpf_skb_store_bytes(skb, xx, xx, a, 0);
}

In the code above, "a > 0" will be compiled to "if a == 0 goto xxx". In
the TRUE branch, the dst_reg will be marked as known to 0. However, in the
fallthrough(FALSE) branch, the dst_reg will not be handled, which makes
the [min, max] for a is [0, 99], not [1, 99].

In the 1st patch, we reduce the range of the dst reg if the src reg is a
const and is exactly the edge of the dst reg For BPF_JNE.

In the 2nd patch, we remove reduplicated s32 casting in "crafted_cases".

In the 3rd patch, we just activate the test case for this logic in
range_cond(), which is committed by Andrii in the
commit 8863238993e2 ("selftests/bpf: BPF register range bounds tester").

In the 4th patch, we convert the case above to a testcase and add it to
verifier_bounds.c.

Changes since v4:
- add the 2nd patch
- add "{U32, U32, {0, U32_MAX}, {U32_MAX, U32_MAX}}" that we missed in the
3rd patch
- add some comments to the function that we add in the 4th patch
- add reg_not_equal_const() in the 4th patch

Changes since v3:
- do some adjustment to the crafted cases that we added in the 2nd patch
- add the 3rd patch

Changes since v2:
- fix a typo in the subject of the 1st patch
- add some comments to the 1st patch, as Eduard advised
- add some cases to the "crafted_cases"

Changes since v1:
- simplify the code in the 1st patch
- introduce the 2nd patch for the testing
====================

Link: https://lore.kernel.org/r/20231219134800.1550388-1-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: add testcase to verifier_bounds.c for BPF_JNE

Add testcase for the logic that the verifier tracks the BPF_JNE for regs.
The assembly function "reg_not_equal_const()" and "reg_equal_co

selftests/bpf: add testcase to verifier_bounds.c for BPF_JNE

Add testcase for the logic that the verifier tracks the BPF_JNE for regs.
The assembly function "reg_not_equal_const()" and "reg_equal_const" that
we add is exactly converted from the following case:

u32 a = bpf_get_prandom_u32();
u64 b = 0;

a %= 8;
/* the "a > 0" here will be optimized to "a != 0" */
if (a > 0) {
/* now the range of a should be [1, 7] */
bpf_skb_store_bytes(skb, 0, &b, a, 0);
}

Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-5-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-11-21

We've added 85 non-merge commits

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-11-21

We've added 85 non-merge commits during the last 12 day(s) which contain
a total of 63 files changed, 4464 insertions(+), 1484 deletions(-).

The main changes are:

1) Huge batch of verifier changes to improve BPF register bounds logic
and range support along with a large test suite, and verifier log
improvements, all from Andrii Nakryiko.

2) Add a new kfunc which acquires the associated cgroup of a task within
a specific cgroup v1 hierarchy where the latter is identified by its id,
from Yafang Shao.

3) Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext,
from Dave Marchevsky.

4) Fix bpf_get_task_stack() helper to add the correct crosstask check
for the get_perf_callchain(), from Jordan Rome.

5) Fix BPF task_iter internals where lockless usage of next_thread()
was wrong. The rework also simplifies the code, from Oleg Nesterov.

6) Fix uninitialized tail padding via LIBBPF_OPTS_RESET, and another
fix for certain BPF UAPI structs to fix verifier failures seen
in bpf_dynptr usage, from Yonghong Song.

7) Add BPF selftest fixes for map_percpu_stats flakes due to per-CPU BPF
memory allocator not being able to allocate per-CPU pointer successfully,
from Hou Tao.

8) Add prep work around dynptr and string handling for kfuncs which
is later going to be used by file verification via BPF LSM and fsverity,
from Song Liu.

9) Improve BPF selftests to update multiple prog_tests to use ASSERT_*
macros, from Yuran Pereira.

10) Optimize LPM trie lookup to check prefixlen before walking the trie,
from Florian Lehner.

11) Consolidate virtio/9p configs from BPF selftests in config.vm file
given they are needed consistently across archs, from Manu Bretelle.

12) Small BPF verifier refactor to remove register_is_const(),
from Shung-Hsi Yu.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in vmlinux
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_obj_id
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bind_perm
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_tcp_ca
selftests/bpf: reduce verboseness of reg_bounds selftest logs
bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)
bpf: bpf_iter_task_next: use __next_thread() rather than next_thread()
bpf: task_group_seq_get_next: use __next_thread() rather than next_thread()
bpf: emit frameno for PTR_TO_STACK regs if it differs from current one
bpf: smarter verifier log number printing logic
bpf: omit default off=0 and imm=0 in register state log
bpf: emit map name in register state if applicable and available
bpf: print spilled register state in stack slot
bpf: extract register state printing
bpf: move verifier state printing code to kernel/bpf/log.c
bpf: move verbose_linfo() into kernel/bpf/log.c
bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS
bpf: Remove test for MOVSX32 with offset=32
selftests/bpf: add iter test requiring range x range logic
veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag
...
====================

Link: https://lore.kernel.org/r/20231122000500.28126-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS

Rename verifier internal flag BPF_F_TEST_SANITY_STRICT to more neutral
BPF_F_TEST_REG_INVARIANTS. This is a follow up to [0].

A few

bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS

Rename verifier internal flag BPF_F_TEST_SANITY_STRICT to more neutral
BPF_F_TEST_REG_INVARIANTS. This is a follow up to [0].

A few selftests and veristat need to be adjusted in the same patch as
well.

[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231112010609.848406-5-andrii@kernel.org/

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231117171404.225508-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge branch 'bpf-register-bounds-range-vs-range-support'

Andrii Nakryiko says:

====================
BPF register bounds range vs range support

This patch set is a continuation of work started in

Merge branch 'bpf-register-bounds-range-vs-range-support'

Andrii Nakryiko says:

====================
BPF register bounds range vs range support

This patch set is a continuation of work started in [0]. It adds a big set of
manual, auto-generated, and now also random test cases validating BPF
verifier's register bounds tracking and deduction logic.

First few patches generalize verifier's logic to handle conditional jumps and
corresponding range adjustments in case when two non-const registers are
compared to each other. Patch #1 generalizes reg_set_min_max() portion, while
patch #2 does the same for is_branch_taken() part of the overall solution.

Patch #3 improves equality and inequality for cases when BPF program code
mixes 64-bit and 32-bit uses of the same register. Depending on specific
sequence, it's possible to get to the point where u64/s64 bounds will be very
generic (e.g., after signed 32-bit comparison), while we still keep pretty
tight u32/s32 bounds. If in such state we proceed with 32-bit equality or
inequality comparison, reg_set_min_max() might have to deal with adjusting s32
bounds for two registers that don't overlap, which breaks reg_set_min_max().
This doesn't manifest in <range> vs <const> cases, because if that happens
reg_set_min_max() in effect will force s32 bounds to be a new "impossible"
constant (from original smin32/smax32 bounds point of view). Things get tricky
when we have <range> vs <range> adjustments, so instead of trying to somehow
make sense out of such situations, it's best to detect such impossible
situations and prune the branch that can't be taken in is_branch_taken()
logic. This equality/inequality was the only such category of situations with
auto-generated tests added later in the patch set.

But when we start mixing arithmetic operations in different numeric domains
and conditionals, things get even hairier. So, patch #4 adds sanity checking
logic after all ALU/ALU64, JMP/JMP32, and LDX operations. By default, instead
of failing verification, we conservatively reset range bounds to unknown
values, reporting violation in verifier log (if verbose logs are requested).
But to aid development, detection, and debugging, we also introduce a new test
flag, BPF_F_TEST_SANITY_STRICT, which triggers verification failure on range
sanity violation.

Patch #11 sets BPF_F_TEST_SANITY_STRICT by default for test_progs and
test_verifier. Patch #12 adds support for controlling this in veristat for
testing with production BPF object files.

Getting back to BPF verifier, patches #5 and #6 complete verifier's range
tracking logic clean up. See respective patches for details.

With kernel-side taken care of, we move to testing. We start with building
a tester that validates existing <range> vs <scalar> verifier logic for range
bounds. Patch #7 implements an initial version of such a tester. We guard
millions of generated tests behind SLOW_TESTS=1 envvar requirement, but also
have a relatively small number of tricky cases that came up during development
and debugging of this work. Those will be executed as part of a normal
test_progs run.

Patch #8 simulates more nuanced JEQ/JNE logic we added to verifier in patch #3.
Patch #9 adds <range> vs <range> "slow tests".

Patch #10 is a completely new one, it adds a bunch of randomly generated cases
to be run normally, without SLOW_TESTS=1 guard. This should help to get
a bunch of cover, and hopefully find some remaining latent problems if
verifier proactively as part of normal BPF CI runs.

Finally, a tiny test which was, amazingly, an initial motivation for this
whole work, is added in lucky patch #13, demonstrating how verifier is now
smart enough to track actual number of elements in the array and won't require
additional checks on loop iteration variable inside the bpf_for() open-coded
iterator loop.

[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=798308&state=*

v1->v2:
- use x < y => y > x property to minimize reg_set_min_max (Eduard);
- fix for JEQ/JNE logic in reg_bounds.c (Eduard);
- split BPF_JSET and !BPF_JSET cases handling (Shung-Hsi);
- adjustments to reg_bounds.c to make it easier to follow (Alexei);
- added acks (Eduard, Shung-Hsi).
====================

Link: https://lore.kernel.org/r/20231112010609.848406-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: set BPF_F_TEST_SANITY_SCRIPT by default

Make sure to set BPF_F_TEST_SANITY_STRICT program flag by default across
most verifier tests (and a bunch of others that set custom prog flags)

selftests/bpf: set BPF_F_TEST_SANITY_SCRIPT by default

Make sure to set BPF_F_TEST_SANITY_STRICT program flag by default across
most verifier tests (and a bunch of others that set custom prog flags).

There are currently two tests that do fail validation, if enforced
strictly: verifier_bounds/crossing_64_bit_signed_boundary_2 and
verifier_bounds/crossing_32_bit_signed_boundary_2. To accommodate them,
we teach test_loader a flag negation:

__flag(!<flagname>) will *clear* specified flag, allowing easy opt-out.

We apply __flag(!BPF_F_TEST_SANITY_STRICT) to these to tests.

Also sprinkle BPF_F_TEST_SANITY_STRICT everywhere where we already set
test-only BPF_F_TEST_RND_HI32 flag, for completeness.

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231112010609.848406-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. In

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances

- Reduce compound page head access for zero-copy data transfers

- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible

- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance

- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking

- Add lockless accesses annotation to sk_err[_soft]

- Optimize again the skb struct layout

- Extends the skb drop reasons to make it usable by multiple
subsystems

- Better const qualifier awareness for socket casts

BPF:

- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses

- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward

- Add more precise memory usage reporting for all BPF map types

- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params

- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton

- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities

- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc

- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps

- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps

- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree

- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them

- Add ARM32 USDT support to libbpf

- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations

Protocols:

- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address

- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf

- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures

- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers

- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction

- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore

- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support

Netfilter:

- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged

- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support

- The iptables 32bit compat interface isn't compiled in by default
anymore

- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used

- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device

Driver API:

- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time

- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them

- Allow the page_pool to directly recycle the pages from safely
localized NAPI

- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization

- Add YNL support for user headers and struct attrs

- Add partial YNL specification for devlink

- Add partial YNL specification for ethtool

- Add tc-mqprio and tc-taprio support for preemptible traffic classes

- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device

- Add basic LED support for switch/phy

- Add NAPI documentation, stop relaying on external links

- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space

- Add transceiver support and improve the error messages for CAN-FD
controllers

New hardware / drivers:

- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY

- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997

- Can:
- STMicroelectronics bxcan stm32f429

Drivers:

- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP

- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame

- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates

- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E

- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware

- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets

- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)

- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility

- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-04-21

We've added 71 non-merge commits

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-04-21

We've added 71 non-merge commits during the last 8 day(s) which contain
a total of 116 files changed, 13397 insertions(+), 8896 deletions(-).

The main changes are:

1) Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward,
from Florian Westphal.

2) Fix race between btf_put and btf_idr walk which caused a deadlock,
from Alexei Starovoitov.

3) Second big batch to migrate test_verifier unit tests into test_progs
for ease of readability and debugging, from Eduard Zingerman.

4) Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree, from Dave Marchevsky.

5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF
selftests into libbpf-provided bpf_helpers.h header and improve
kfunc handling, from Andrii Nakryiko.

6) Support 64-bit pointers to kfuncs needed for archs like s390x,
from Ilya Leoshkevich.

7) Support BPF progs under getsockopt with a NULL optval,
from Stanislav Fomichev.

8) Improve verifier u32 scalar equality checking in order to enable
LLVM transformations which earlier had to be disabled specifically
for BPF backend, from Yonghong Song.

9) Extend bpftool's struct_ops object loading to support links,
from Kui-Feng Lee.

10) Add xsk selftest follow-up fixes for hugepage allocated umem,
from Magnus Karlsson.

11) Support BPF redirects from tc BPF to ifb devices,
from Daniel Borkmann.

12) Add BPF support for integer type when accessing variable length
arrays, from Feng Zhou.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits)
selftests/bpf: verifier/value_ptr_arith converted to inline assembly
selftests/bpf: verifier/value_illegal_alu converted to inline assembly
selftests/bpf: verifier/unpriv converted to inline assembly
selftests/bpf: verifier/subreg converted to inline assembly
selftests/bpf: verifier/spin_lock converted to inline assembly
selftests/bpf: verifier/sock converted to inline assembly
selftests/bpf: verifier/search_pruning converted to inline assembly
selftests/bpf: verifier/runtime_jit converted to inline assembly
selftests/bpf: verifier/regalloc converted to inline assembly
selftests/bpf: verifier/ref_tracking converted to inline assembly
selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
selftests/bpf: verifier/map_in_map converted to inline assembly
selftests/bpf: verifier/lwt converted to inline assembly
selftests/bpf: verifier/loops1 converted to inline assembly
selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
selftests/bpf: verifier/direct_packet_access converted to inline assembly
selftests/bpf: verifier/d_path converted to inline assembly
selftests/bpf: verifier/ctx converted to inline assembly
selftests/bpf: verifier/btf_ctx_access converted to inline assembly
selftests/bpf: verifier/bpf_get_stack converted to inline assembly
...
====================

Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests/bpf: verifier/bounds converted to inline assembly

Test verifier/bounds automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lo

selftests/bpf: verifier/bounds converted to inline assembly

Test verifier/bounds automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs

Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.

Core & protocols:

- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes

This improves TCP performances with many concurrent connections up
to 40%

- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks

- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination

- Refactor the TCP bind conflict code, shrinking related socket
structs

- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF

- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it

- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations

- Reduce extension header parsing overhead at GRO time

- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries

- Reorder nftables struct members, to keep data accessed by the
datapath first

- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer

- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)

- More data-race annotations

- Extend the diag interface to dump TCP bound-only sockets

- Conditional notification of events for TC qdisc class and actions

- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID

- Implement SMCv2.1 virtual ISM device support

- Add support for Batman-avd mulicast packet type

BPF:

- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes

- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload

- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y

- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques

- Support uid/gid options when mounting bpffs

- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id

- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext

- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter

- Support for VLAN tag in XDP hints

- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)

Misc:

- Support for parellel TC self-tests execution

- Increase MPTCP self-tests coverage

- Updated the bridge documentation, including several so-far
undocumented features

- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs

- Add TCP-AO self-tests

- Add kunit tests for both cfg80211 and mac80211

- Autogenerate Netlink families documentation from YAML spec

- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs

- A bunch of additional module descriptions fixes

- Catch incorrect freeing of pages belonging to a page pool

Driver API:

- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust

- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship

- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances

- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host

- Add support for ethtool symmetric-xor RSS hash

- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform

- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute

- Convert older drivers to platform remove callback returning void

- Add support for PHY package MMD read/write

New hardware / drivers:

- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY

- Bluetooth:
- IMC Networks Bluetooth radio

Removed:

- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver

Driver updates:

- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload

- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation

- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode

- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support

- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support

- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels

- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
bpf-next-for-netdev
The following pull-request contains BPF updates

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.

We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).

The main changes are:

1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.

These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL

2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.

3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.

4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.

5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.

6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.

7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.

8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...