Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'use-network-helpers-part-7'

Geliang Tang says:

====================
use network helpers, part 7

From: Geliang Tang <tanggeliang@kylinos.cn>

v6:
- update ASSERT strings in patch 4 a

Merge branch 'use-network-helpers-part-7'

Geliang Tang says:

====================
use network helpers, part 7

From: Geliang Tang <tanggeliang@kylinos.cn>

v6:
- update ASSERT strings in patch 4 as Eduard suggested. (thanks)

v5:
- update patch 1, add getsockopt(SO_PROTOCOL) in connect_to_fd() to
fix errors reported by CI.

v4:
- fix errors reported by CI.

v3:
- rename start_client to client_socket
- Use connect_to_addr in connect_to_fd_opt

v2:
- update patch 2, extract a new helper start_client.
- drop patch 3, keep must_fail in network_helper_opts.

Drop type and noconnect from network_helper_opts. And use start_server_str
in mptcp and test_tcp_check_syncookie_user.

Patches 1-4 address Martin's comments in the previous series.
====================

Link: https://lore.kernel.org/r/cover.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Drop noconnect from network_helper_opts

In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be
used to replace connect_to_fd_opts() with "noconnect" opts, and the str

selftests/bpf: Drop noconnect from network_helper_opts

In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be
used to replace connect_to_fd_opts() with "noconnect" opts, and the strcut
member "noconnect" of network_helper_opts can be dropped now, always
connect to server in connect_to_fd_opts().

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f45760becce51986e4e08283c7df0f933eb0da14.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Add client_socket helper

This patch extracts a new helper client_socket() from connect_to_fd_opts()
to create the client socket, but don't connect to the server. Then
connect_to_fd_op

selftests/bpf: Add client_socket helper

This patch extracts a new helper client_socket() from connect_to_fd_opts()
to create the client socket, but don't connect to the server. Then
connect_to_fd_opts() can be implemented using client_socket() and
connect_fd_to_addr(). This helper can be used in connect_to_addr() too,
and make "noconnect" opts useless.

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4169c554e1cee79223feea49a1adc459d55e1ffe.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Use connect_to_addr in connect_to_fd_opt

This patch moves "post_socket_cb" and "noconnect" into connect_to_addr(),
then connect_to_fd_opts() can be implemented by getsockname() and
co

selftests/bpf: Use connect_to_addr in connect_to_fd_opt

This patch moves "post_socket_cb" and "noconnect" into connect_to_addr(),
then connect_to_fd_opts() can be implemented by getsockname() and
connect_to_addr(). This change makes connect_to_* interfaces more unified.

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4569c30533e14c22fae6c05070aad809720551c1.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Drop type from network_helper_opts

The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
byp

selftests/bpf: Drop type from network_helper_opts

The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
bypassing most (or at least some) of the connect_to_fd_opts() logic. It's
much better that test should have its own connect_to_fd_opts() instead.

This patch adds a new "type" parameter for connect_to_fd_opts(), then
opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in
it.

In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass
it to connect_to_fd_opts().

In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to
connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW"
and "SOCK_DGRAM" are passed to it.

With these changes, the strcut member "type" of network_helper_opts can be
dropped now.

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'bpf/for-next' into sched_ext-base

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-06-06

We've added 54 non-merge commits

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-06-06

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).

The main changes are:

1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.

2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.

3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.

4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.

5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.

6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.

7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.

8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.

9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.

10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.

11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.

12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================

Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge branch 'use network helpers, part 5'

Geliang Tang says:

====================
This patchset uses post_socket_cb callbacks of struct network_helper_opts
to refactor do_test() in bpf_tcp_ca.c.

Merge branch 'use network helpers, part 5'

Geliang Tang says:

====================
This patchset uses post_socket_cb callbacks of struct network_helper_opts
to refactor do_test() in bpf_tcp_ca.c.

v5:
- address Martin's comments in v4 (thanks)
- add patch 4, use start_server_str in test_dctcp_fallback too
- ASSERT_* is already used in settcpca, use this helper in cc_cb (patch 3).

v4:
- address Martin's comments in v3 (thanks).
- drop 2 patches, keep "type" as the individual arg to start_server_addr,
connect_to_addr and start_server_str.

v3:
- Add 4 new patches, 1-3 are cleanups. 4 adds a new helper.
- address Martin's comments in v2.

v2:
- rebased on commit "selftests/bpf: Add test for the use of new args in
cong_control"
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

selftests/bpf: Use post_socket_cb in start_server_str

This patch uses start_server_str() helper in test_dctcp_fallback() in
bpf_tcp_ca.c, instead of using start_server() and settcpca(). For
support

selftests/bpf: Use post_socket_cb in start_server_str

This patch uses start_server_str() helper in test_dctcp_fallback() in
bpf_tcp_ca.c, instead of using start_server() and settcpca(). For
support opts in start_server_str() helper, opts->cb_opts needs to be
passed to post_socket_cb() in __start_server().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/414c749321fa150435f7fe8e12c80fec8b447c78.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

selftests/bpf: Use post_socket_cb in connect_to_fd_opts

Since the post_socket_cb() callback is added in struct network_helper_opts,
it's make sense to use it not only in __start_server(), but also i

selftests/bpf: Use post_socket_cb in connect_to_fd_opts

Since the post_socket_cb() callback is added in struct network_helper_opts,
it's make sense to use it not only in __start_server(), but also in
connect_to_fd_opts(). Then it can be used to set TCP_CONGESTION sockopt.

Add a "void *" type member cb_opts into struct network_helper_opts, and add
a new struct named cb_opts in prog_tests/bpf_tcp_ca.c, then cc can be moved
into struct cb_opts from network_helper_opts. Define a new callback cc_cb()
to set TCP_CONGESTION sockopt, and set it to post_socket_cb pointer of opts.
Define a new cb_opts cubic, set it to cb_opts of opts. Pass this opts to
connect_to_fd_opts() in test_dctcp_fallback().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/b512bb8d8f6854c9ea5c409b69d1bf37c6f272c6.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

selftests/bpf: Add start_server_str helper

It's a tech debt that start_server() does not take the "opts" argument.
It's pretty handy to have start_server() as a helper that takes string
address.

So

selftests/bpf: Add start_server_str helper

It's a tech debt that start_server() does not take the "opts" argument.
It's pretty handy to have start_server() as a helper that takes string
address.

So this patch creates a new helper start_server_str(). Then start_server()
can be a wrapper of it.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/606e6cfd7e1aff8bc51ede49862eed0802e52170.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

selftests/bpf: Drop struct post_socket_opts

It's not possible to have one generic/common "struct post_socket_opts"
for all tests. It's better to have the individual test define its own
callback opts

selftests/bpf: Drop struct post_socket_opts

It's not possible to have one generic/common "struct post_socket_opts"
for all tests. It's better to have the individual test define its own
callback opts struct.

So this patch drops struct post_socket_opts, and changes the second
parameter of post_socket_cb as "void *" type.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f8bda41c7cb9cb6979b2779f89fb3a684234304f.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Cross merge.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Complete rework of garbage collectio

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Complete rework of garbage collection of AF_UNIX sockets.

AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.

- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).

- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.

- Continue work of converting from rtnl lock to RCU protection.

Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.

- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.

- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.

- Support peek with an offset on TCP sockets.

- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.

- Add intra-node communication shortcut to improve SMC performance.

- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.

- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

- Add reset reasons for tracing what caused a TCP reset to be sent.

- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.

Things we sprinkled into general kernel code:

- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

This required touch-ups and renaming of a few existing users.

- Add Endian-dependent __counted_by_{le,be} annotations.

- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.

Netfilter:

- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.

BPF:

- Add eBPF JIT for ARCv2 CPUs.

- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.

- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.

- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.

- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.

- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.

- Harden the BPF verifier's and/or/xor value tracking.

- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.

- Support bpf_tail_call_static() helper for BPF programs with GCC 13.

- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.

Driver API:

- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.

- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.

- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.

- Common (ethtool) statistics for hardware timestamping.

Tests and tooling:

- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.

- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.

- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.

- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".

- Refactor BPF selftests to use common network helpers.

- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.

- Teach Python YAML Netlink to decode attribute policies.

- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.

- Add hyperlinks between definitions in generated Netlink docs.

Drivers:

- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action

- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect

- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching

- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup

- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger

- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support

- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-05-13

We've added 119 non-merge commit

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-05-13

We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).

The main changes are:

1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.

2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.

3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.

4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.

5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.

6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.

7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.

8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.

9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.

10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.

11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.

12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.

13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.

14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.

15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.

16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.

17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================

Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...