Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get drm-misc-fixes to the state of v6.9-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

spi: Merge up v6.8 release

An i.MX fix depends on other fixes that were sent to v6.8.

Merge branch 'master' into mm-stable

Merge branch 'for-6.9/amd-sfh' into for-linus

- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)

Signed-off-by: Jiri Kosina <jkosina@suse.com>

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Large effort by Eric to lower rtnl_lo

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Large effort by Eric to lower rtnl_lock pressure and remove locks:

- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.

- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.

- Remove locks / serialization in the socket diag interface.

- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

- Remove the dev_base_lock, depend on RCU where necessary.

- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.

- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.

- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.

- Support TCP_NOTSENT_LOWAT in MPTCP.

- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.

- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.

- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.

- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.

- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).

- Speed up scanning for expired routes by keeping a dedicated list.

- Speed up "generic" XDP by trying harder to avoid large allocations.

- Support attaching arbitrary metadata to netconsole messages.

Things we sprinkled into general kernel code:

- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).

- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).

Netfilter:

- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.

- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.

BPF:

- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.

- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.

- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.

- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.

- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.

- Add support for retrieval of cookies for perf/kprobe multi links.

- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.

- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.

Wireless:

- Add SPP (signaling and payload protected) AMSDU support.

- Support wider bandwidth OFDMA, as required for EHT operation.

Driver API:

- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.

- Define an API for querying per netdev queue statistics from
drivers.

- IPSec: account in global stats for fully offloaded sessions.

- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.

- Enable Rx hashing (RSS) on GTP protocol fields.

Misc:

- Improvements and refactoring all over networking selftests.

- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.

- Address all missing MODULE_DESCRIPTION() warnings in networking.

- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".

Drivers:

- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues

- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support

- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch

- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.

- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx

- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...

show more ...

Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.9

This has been quite a small release, there's a lot of driver specific
cl

Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.9

This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:

- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x

show more ...

Merge tag 'kvm-x86-guest_memfd_fixes-6.8' of https://github.com/kvm-x86/linux into HEAD

KVM GUEST_MEMFD fixes for 6.8:

- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avo

Merge tag 'kvm-x86-guest_memfd_fixes-6.8' of https://github.com/kvm-x86/linux into HEAD

KVM GUEST_MEMFD fixes for 6.8:

- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.

- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.

- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.

- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.

show more ...

Merge tag 'rxrpc-iothread-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
Here are some changes to AF_RXRPC:

(1) Cache the tr

Merge tag 'rxrpc-iothread-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
Here are some changes to AF_RXRPC:

(1) Cache the transmission serial number of ACK and DATA packets in the
rxrpc_txbuf struct and log this in the retransmit tracepoint.

(2) Don't use atomics on rxrpc_txbuf::flags[*] and cache the intended wire
header flags there too to avoid duplication.

(3) Cache the wire checksum in rxrpc_txbuf to make it easier to create
jumbo packets in future (which will require altering the wire header
to a jumbo header and restoring it back again for retransmission).

(4) Fix the protocol names in the wire ACK trailer struct.

(5) Strip all the barriers and atomics out of the call timer tracking[*].

(6) Remove atomic handling from call->tx_transmitted and
call->acks_prev_seq[*].

(7) Don't bother resetting the DF flag after UDP packet transmission. To
change it, we now call directly into UDP code, so it's quick just to
set it every time.

(8) Merge together the DF/non-DF branches of the DATA transmission to
reduce duplication in the code.

(9) Add a kvec array into rxrpc_txbuf and start moving things over to it.
This paves the way for using page frags.

(10) Split (sub)packet preparation and timestamping out of the DATA
transmission function. This helps pave the way for future jumbo
packet generation.

(11) In rxkad, don't pick values out of the wire header stored in
rxrpc_txbuf, buf rather find them elsewhere so we can remove the wire
header from there.

(12) Move rxrpc_send_ACK() to output.c so that it can be merged with
rxrpc_send_ack_packet().

(13) Use rxrpc_txbuf::kvec[0] to access the wire header for the packet
rather than directly accessing the copy in rxrpc_txbuf. This will
allow that to be removed to a page frag.

(14) Switch from keeping the transmission buffers in rxrpc_txbuf allocated
in the slab to allocating them using page fragment allocators. There
are separate allocators for DATA packets (which persist for a while)
and control packets (which are discarded immediately).

We can then turn on MSG_SPLICE_PAGES when transmitting DATA and ACK
packets.

We can also get rid of the RCU cleanup on rxrpc_txbufs, preferring
instead to release the page frags as soon as possible.

(15) Parse received packets before handling timeouts as the former may
reset the latter.

(16) Make sure we don't retransmit DATA packets after all the packets have
been ACK'd.

(17) Differentiate traces for PING ACK transmission.

(18) Switch to keeping timeouts as ktime_t rather than a number of jiffies
as the latter is too coarse a granularity. Only set the call timer at
the end of the call event function from the aggregate of all the
timeouts, thereby reducing the number of timer calls made. In future,
it might be possible to reduce the number of timers from one per call
to one per I/O thread and to use a high-precision timer.

(19) Record RTT probes after successful transmission rather than recording
it before and then cancelling it after if unsuccessful[*]. This
allows a number of calls to get the current time to be removed.

(20) Clean up the resend algorithm as there's now no need to walk the
transmission buffer under lock[*]. DATA packets can be retransmitted
as soon as they're found rather than being queued up and transmitted
when the locked is dropped.

(21) When initially parsing a received ACK packet, extract some of the
fields from the ack info to the skbuff private data. This makes it
easier to do path MTU discovery in the future when the call to which a
PING RESPONSE ACK refers has been deallocated.

[*] Possible with the move of almost all code from softirq context to the
I/O thread.

Link: https://lore.kernel.org/r/20240301163807.385573-1-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20240304084322.705539-1-dhowells@redhat.com/ # v2

* tag 'rxrpc-iothread-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (21 commits)
rxrpc: Extract useful fields from a received ACK to skb priv data
rxrpc: Clean up the resend algorithm
rxrpc: Record probes after transmission and reduce number of time-gets
rxrpc: Use ktimes for call timeout tracking and set the timer lazily
rxrpc: Differentiate PING ACK transmission traces.
rxrpc: Don't permit resending after all Tx packets acked
rxrpc: Parse received packets before dealing with timeouts
rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags
rxrpc: Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire
rxrpc: Move rxrpc_send_ACK() to output.c with rxrpc_send_ack_packet()
rxrpc: Don't pick values out of the wire header when setting up security
rxrpc: Split up the DATA packet transmission function
rxrpc: Add a kvec[] to the rxrpc_txbuf struct
rxrpc: Merge together DF/non-DF branches of data Tx function
rxrpc: Do lazy DF flag resetting
rxrpc: Remove atomic handling on some fields only used in I/O thread
rxrpc: Strip barriers and atomics off of timer tracking
rxrpc: Fix the names of the fields in the ACK trailer struct
rxrpc: Note cksum in txbuf
rxrpc: Convert rxrpc_txbuf::flags into a mask and don't use atomics
...
====================

Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

rxrpc: Use ktimes for call timeout tracking and set the timer lazily

Track the call timeouts as ktimes rather than jiffies as the latter's
granularity is too high and only set the timer at the end o

rxrpc: Use ktimes for call timeout tracking and set the timer lazily

Track the call timeouts as ktimes rather than jiffies as the latter's
granularity is too high and only set the timer at the end of the event
handling function.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org

show more ...

Merge tag 'drm-misc-next-2024-02-29' into msm-next

Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")

drm-misc-next for v6.9:

UAPI Changes:

Cross-subs

Merge tag 'drm-misc-next-2024-02-29' into msm-next

Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")

drm-misc-next for v6.9:

UAPI Changes:

Cross-subsystem Changes:

backlight:
- corgi: include backlight header

fbdev:
- Cleanup includes in public header file
- fbtft: Include backlight header

Core Changes:

edid:
- Remove built-in EDID data

dp:
- Avoid AUX transfers on powered-down displays
- Add VSC SDP helpers

modesetting:
- Add sanity checks for polling
- Cleanups

scheduler:
- Cleanups

tests:
- Add helpers for mode-setting tests

Driver Changes:

i915:
- Use shared VSC SDP helper

mgag200:
- Work around PCI write bursts

mxsfb:
- Use managed mode config

nouveau:
- Include backlight header where necessary

qiac:
- Cleanups

sun4:
- HDMI: updates to atomic mode setting

tegra:
- Fix GEM refounting in error paths

tidss:
- Fix multi display
- Fix initial Z position

v3d:
- Support display MMU page size

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Sima needs a more recent release to apply a patch.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next to prepare drm-misc-next-fixes for
the rest of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next up to v6.8-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

S

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge tag 'v6.8-rc6' into x86/boot, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'for-6.8/cxl-cper' into for-6.8/cxl

Pick up CXL CPER notification removal for v6.8-rc6, to return in a later
merge window.

ASoC: Intel: avs: Fixes and new platforms support

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based

ASoC: Intel: avs: Fixes and new platforms support

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:

SKL <- APL <- CNL <- ICL <- TGL

rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.

Layout of the patchset:

First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.

Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.

The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.

show more ...

Merge tag 'v6.8-rc5' into timers/core, to resolve conflict

There's a conflict between this recent upstream fix:

dad6a09f3148 ("hrtimer: Report offline hrtimer enqueue")

and a pending commit in t

Merge tag 'v6.8-rc5' into timers/core, to resolve conflict

There's a conflict between this recent upstream fix:

dad6a09f3148 ("hrtimer: Report offline hrtimer enqueue")

and a pending commit in the timers tree:

1a4729ecafc2 ("hrtimers: Move hrtimer base related definitions into hrtimer_defs.h")

Resolve it by applying the upstream fix to the new <linux/hrtimer_defs.h> header.

Conflict:
include/linux/hrtimer.h
Semantic conflict:
include/linux/hrtimer_defs.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

regulator: Merge up v6.8-rc5

There are dependencies on the PWM fixes for some new work on the PWM
driver.

Merge 6.8-rc5 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>