Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
"User visible changes, features:

- rebuilding of the free space tree

Merge tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
"User visible changes, features:

- rebuilding of the free space tree at mount time is done in more
transactions, fix potential hangs when the transaction thread is
blocked due to large amount of block groups

- more read IO balancing strategies (experimental config), add two
new ways how to select a device for read if the profiles allow that
(all RAID1*), the current default selects the device by pid which
is good on average but less performant for single reader workloads

- select preferred device for all reads (namely for testing)
- round-robin, balance reads across devices relevant for the
requested IO range

- add encoded write ioctl support to io_uring (read was added in
6.12), basis for writing send stream using that instead of
syscalls, non-blocking mode is not yet implemented

- support FS_IOC_READ_VERITY_METADATA, applications can use the
metadata to do their own verification

- pass inode's i_write_hint to bios, for parity with other
filesystems, ioctls F_GET_RW_HINT/F_SET_RW_HINT

Core:

- in zoned mode: allow to directly reclaim a block group by simply
resetting it, then it can be reused and another block group does
not need to be allocated

- super block validation now also does more comprehensive sys array
validation, adding it to the points where superblock is validated
(post-read, pre-write)

- subpage mode fixes:
- fix double accounting of blocks due to some races
- improved or fixed error handling in a few cases (compression,
delalloc)

- raid stripe tree:
- fix various cases with extent range splitting or deleting
- implement hole punching to extent range
- reduce number of stripe tree lookups during bio submission
- more self-tests

- updated self-tests (delayed refs)

- error handling improvements

- cleanups, refactoring
- remove rest of backref caching infrastructure from relocation,
not needed anymore
- error message updates
- remove unnecessary calls when extent buffer was marked dirty
- unused parameter removal
- code moved to new files

Other code changes: add rb_find_add_cached() to the rb-tree API"

* tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (127 commits)
btrfs: selftests: add a selftest for deleting two out of three extents
btrfs: selftests: add test for punching a hole into 3 RAID stripe-extents
btrfs: selftests: add selftest for punching holes into the RAID stripe extents
btrfs: selftests: test RAID stripe-tree deletion spanning two items
btrfs: selftests: don't split RAID extents in half
btrfs: selftests: check for correct return value of failed lookup
btrfs: don't use btrfs_set_item_key_safe on RAID stripe-extents
btrfs: implement hole punching for RAID stripe extents
btrfs: fix deletion of a range spanning parts two RAID stripe extents
btrfs: fix tail delete of RAID stripe-extents
btrfs: fix front delete range calculation for RAID stripe extents
btrfs: assert RAID stripe-extent length is always greater than 0
btrfs: don't try to delete RAID stripe-extents if we don't need to
btrfs: selftests: correct RAID stripe-tree feature flag setting
btrfs: add io_uring interface for encoded writes
btrfs: remove the unused locked_folio parameter from btrfs_cleanup_ordered_extents()
btrfs: add extra error messages for delalloc range related errors
btrfs: subpage: dump the involved bitmap when ASSERT() failed
btrfs: subpage: fix the bitmap dump of the locked flags
btrfs: do proper folio cleanup when run_delalloc_nocow() failed
...

show more ...

btrfs: move select_delayed_ref() and export it

This helper is how we select the delayed ref to run once we've selected
the delayed ref head. I need this exported to add a unit test for
delayed refs

btrfs: move select_delayed_ref() and export it

This helper is how we select the delayed ref to run once we've selected
the delayed ref head. I need this exported to add a unit test for
delayed refs, and it's more natural home is in delayed-ref.c. Rename it
to btrfs_select_delayed_ref and move it into delayed-ref.c.

Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'iommu-updates-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git

Merge with Joerg's tree for dependencies on the next patches.

====================

Merge tag 'iommu-updates-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git

Merge with Joerg's tree for dependencies on the next patches.

======================================
IOMMU Updates for Linux v6.13:

Including:

- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.

- New IOMMU driver for RISC-V.

- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.

- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.

- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.

- S390 IOMMU:
- Implement support for blocking domain.

- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.

- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
======================================

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
t

Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).

User visible changes:

- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode

- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"

- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM

- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots

Performance improvements:

- reduce lock contention when traversing extent buffers

- reduce extent tree lock contention when searching for inline
backref

- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures

- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)

Core changes:

- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests

- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that

- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback

- continued folio API conversions:
- buffered writes

- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop

- proper locking of root item regarding starting send

- error handling improvements

- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"

* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...

show more ...

Merge branch 'for-6.13/steelseries' into for-linus

- bugfixes for Steelseries Arctis 1 battery level handling (Bastien Nocera)

Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.13, part 1

Major Improvements and Refactoring:

- Al

Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.13, part 1

Major Improvements and Refactoring:

- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.

- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.

- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).

- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.

- ACPI documentation for PIIX4.

New Features:

- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.

Deprecated Features:

- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.

New Hardware Support:

- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)

show more ...

ASoc: simple-mux: Allow to specify an idle-state

Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:

This series adds support for the idle-state property from the mux
framework to the

ASoc: simple-mux: Allow to specify an idle-state

Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:

This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.

show more ...

Merge patch series "Zacas/Zabha support and qspinlocks"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

This implements [cmp]xchgXX() macros using Zacas and Zabha extensions
and finally uses those n

Merge patch series "Zacas/Zabha support and qspinlocks"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

This implements [cmp]xchgXX() macros using Zacas and Zabha extensions
and finally uses those newly introduced macros to add support for
qspinlocks: note that this implementation of qspinlocks satisfies the
forward progress guarantee.

It also uses Ziccrse to provide the qspinlock implementation.

Thanks to Guo and Leonardo for their work!

* b4-shazam-merge: (1314 commits)
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header

Link: https://lore.kernel.org/r/20241103145153.105097-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list

The comment refers to a list in the respective delayed ref head that no
longer exists (ref_list), it was replaced with a rbtre

btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list

The comment refers to a list in the respective delayed ref head that no
longer exists (ref_list), it was replaced with a rbtree (ref_tree) in
commit 0e0adbcfdc90 ("btrfs: track refs in a rb_tree instead of a list").

So update the stale comment to refer to the rbtree instead of the old
list.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: track delayed ref heads in an xarray

Currently we use a red black tree (rb-tree) to track the delayed ref
heads (in struct btrfs_delayed_ref_root::href_root). This however is not
very efficie

btrfs: track delayed ref heads in an xarray

Currently we use a red black tree (rb-tree) to track the delayed ref
heads (in struct btrfs_delayed_ref_root::href_root). This however is not
very efficient when the number of delayed ref heads is large (and it's
very common to be at least in the order of thousands) since rb-trees are
binary trees. For example for 10K delayed ref heads, the tree has a depth
of 13. Besides that, inserting into the tree requires navigating through
it and pulling useless cache lines in the process since the red black tree
nodes are embedded within the delayed ref head structure - on the other
hand, by being embedded, it requires no extra memory allocations.

We can improve this by using an xarray instead which has a much higher
branching factor than a red black tree (binary balanced tree) and is more
cache friendly and behaves like a resizable array, with a much better
search and insertion complexity than a red black tree. This only has one
small disadvantage which is that insertion will sometimes require
allocating memory for the xarray - which may fail (not that often since
it uses a kmem_cache) - but on the other hand we can reduce the delayed
ref head structure size by 24 bytes (from 152 down to 128 bytes) after
removing the embedded red black tree node, meaning than we can now fit
32 delayed ref heads per 4K page instead of 26, and that gain compensates
for the occasional memory allocations needed for the xarray nodes. We
also end up using only 2 cache lines instead of 3 per delayed ref head.

Running the following fs_mark test showed some improvements:

$ cat test.sh
#!/bin/bash

DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)

echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor

mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT

OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done

fs_mark $OPTS

umount $MNT

Before this patch:

FSUse% Count Size Files/sec App Overhead
10 1200000 0 171845.7 12253839
16 2400000 0 230898.7 12308254
23 3600000 0 212292.9 12467768
30 4800000 0 195737.8 12627554
46 6000000 0 171055.2 12783329

After this patch:

FSUse% Count Size Files/sec App Overhead
10 1200000 0 173835.0 12246131
16 2400000 0 233537.8 12271746
23 3600000 0 220398.7 12307737
30 4800000 0 204483.6 12392318
40 6000000 0 182923.3 12771843

Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: add comments regarding locking to struct btrfs_delayed_ref_root

Add some comments to struct btrfs_delayed_ref_root's fields to mention
what its spinlock protects.

Reviewed-by: Boris Burkov <

btrfs: add comments regarding locking to struct btrfs_delayed_ref_root

Add some comments to struct btrfs_delayed_ref_root's fields to mention
what its spinlock protects.

Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: pass fs_info to btrfs_delete_ref_head()

One of the following patches in the series will need to access fs_info at
btrfs_delete_ref_head(), so pass a fs_info argument to it.

Reviewed-by: Bori

btrfs: pass fs_info to btrfs_delete_ref_head()

One of the following patches in the series will need to access fs_info at
btrfs_delete_ref_head(), so pass a fs_info argument to it.

Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...