Merge branch 'x86/urgent' into core/efi, to pick up a pending EFI fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-fix-rt5645

Merge branch 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm into clk-fixes

Pull fixes from Tero Kristo:

"A few TI clock driver fixes to pull against 4.3-rc"

* 'for-4.3-rc/ti-clk

Merge branch 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm into clk-fixes

Pull fixes from Tero Kristo:

"A few TI clock driver fixes to pull against 4.3-rc"

* 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm: (3 commits)
clk: ti: dflt: fix enable_reg validity check
clk: ti: fix dual-registration of uart4_ick
clk: ti: clk-7xx: Remove hardwired ABE clock configuration

show more ...

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next

Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.

Signed-off-

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next

Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'v4.3-rc3' into next

Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062
OnKey driver.

Merge tag 'v4.3-rc2' into k.o/for-4.3-v1

Linux 4.3-rc2

Merge tag 'v4.3-rc2' into topic/drm-misc

Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.

On top of that there's a silen

Merge tag 'v4.3-rc2' into topic/drm-misc

Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.

On top of that there's a silent conflict in the new fsl-dcu driver
merged into 4.3 and

commit 844f9111f6f54f88eb2f0fac121b82ce77193866
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Sep 2 10:42:40 2015 +0200

drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.

which Thierry Reding spotted and provided a fixup for.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branch 'for-linus' into for-next

Merge tag 'v4.3-rc1' into spi-fix-doc

Linux 4.3-rc1

Merge branch 'fixes-rc1' into omap-for-v4.3/fixes

Merge tag 'v4.3-rc1' into MTD -next development

Merge tag 'v4.3-rc1' into patchwork

Linux 4.3-rc1

* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() an

Merge tag 'v4.3-rc1' into patchwork

Linux 4.3-rc1

* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
thermal: fix intel PCH thermal driver mismerge
ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
Revert "writeback: plug writeback at a high level"
scsi_dh: fix randconfig build error
target: use stringify.h instead of own definition
target/user: Fix UFLAG_UNKNOWN_OP handling
target: Remove no-op conditional
target/user: Remove unused variable
target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
...

show more ...

Merge tag 'v4.3-rc1' into perf/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.3-rc1' into locking/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.3-rc1' into sched/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?

1) Add conntrack support to openvswitch, from Joe Stringer.

2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.

3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.

5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.

6) Document the DSA layer, from Florian Fainelli.

7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.

8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.

9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.

10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.

11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.

15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.

16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.

17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...

show more ...

Merge branch 'for-4.3/gembird' into for-linus

Merge tag 'v4.2-rc8' into x86/mm, before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'stmmac-cleanup'

Joachim Eastwood says:

====================
stmmac clean up for 4.3 part2

This patch set creates proper probe functions in the remaining
dwmac-* drivers, lets the dri

Merge branch 'stmmac-cleanup'

Joachim Eastwood says:

====================
stmmac clean up for 4.3 part2

This patch set creates proper probe functions in the remaining
dwmac-* drivers, lets the drivers manage their own of match data
structure, and cleans up some of the drivers a bit. Note that
should be no functional change in any of the drivers.

First patch from Fengguang fixes a Coccinelle that was found after
the previous patch set when into next.

Probe functions are best placed just above the platform_driver
struct since it usually needs to call other functions in the
driver but this requires some code movement in the drivers. To
keep the conversion itself easier to review the code movement is
done in separate patches. This creates some extra churn but I
think it's worth it in this case.

As only a couple of drivers actually needs to use of match data
this pushed down from stmmac_platform and into the drivers. This
also makes it possible for drivers to have their own match data
structure. dwmac-rk benefits most from this.

After each driver has it's own probe function and manages it's
own match data the setup/free hooks and common match data struct
are removed.

Sorry for the slightly largish patch set this time around.

Since I can only test the core changes on my platform and not the
specific dwmac-drivers I greatly appreciate if people could test
this on their respective platforms. I did spend quite a bit of
time visually checking all these patches, but nothing beats real
hardware testing. Thanks!

Patch set based on net-next can also be picked up from here:
https://github.com/manabian/linux-lpc.git stmmac_4.3_part2

For those who want to have a look at all the patches for
v4.3 a branch based on Linus master can be found here:
https://github.com/manabian/linux-lpc.git stmmac_4.2

Previous parts can be found here:
http://www.spinics.net/lists/netdev/msg328997.html
http://www.spinics.net/lists/netdev/msg329932.html
http://www.spinics.net/lists/netdev/msg336097.html
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

stmmac: remove setup/free glue callbacks

As all dwmac-* drivers have been converted to have a proper probe
function the setup callback can now be removed. Also remove the
free callback that wasn't u

stmmac: remove setup/free glue callbacks

As all dwmac-* drivers have been converted to have a proper probe
function the setup callback can now be removed. Also remove the
free callback that wasn't used by any driver.

New dwmac-* drivers should implement standard probe and remove
functions to preform any needed setup and teardown.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

stmmac: move stmmac_pltfr_probe into dwmac-generic

As all dwmac-* drivers now have their own probe function move
the common one into dwmac-generic driver and drop the EXPORT.

Signed-off-by: Joachim

stmmac: move stmmac_pltfr_probe into dwmac-generic

As all dwmac-* drivers now have their own probe function move
the common one into dwmac-generic driver and drop the EXPORT.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'for-linus' into for-next

... to make easier developing HDA ext code.

Merge tag 'asoc-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.2

A lot of small fixes here, a few to the core:

- Fix for binding DA

Merge tag 'asoc-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.2

A lot of small fixes here, a few to the core:

- Fix for binding DAPM stream widgets on devices with prefixes assigned
to them
- Minor fixes for the newly added topology interfaces
- Locking and memory leak fixes for DAPM
- Driver specific fixes

show more ...

Merge tag 'v4.2-rc3' into next

Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.