Merge brank 'mlx5_mkey' into rdma.git for-next

A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.

* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey

Merge brank 'mlx5_mkey' into rdma.git for-next

A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.

* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
RDMA/mlx5: Remove pd from struct mlx5_core_mkey
RDMA/mlx5: Remove size from struct mlx5_core_mkey
RDMA/mlx5: Remove iova from struct mlx5_core_mkey

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

show more ...

Merge tag 'v5.15-rc6' into regulator-5.16

Linux 5.15-rc6

Merge tag 'v5.15-rc6' into asoc-5.16

Linux 5.15-rc6

Merge branch 'x86/urgent' into x86/fpu, to resolve a conflict

Resolve the conflict between these commits:

x86/fpu: 1193f408cd51 ("x86/fpu/signal: Change return type of __fpu_restore_sig() t

Merge branch 'x86/urgent' into x86/fpu, to resolve a conflict

Resolve the conflict between these commits:

x86/fpu: 1193f408cd51 ("x86/fpu/signal: Change return type of __fpu_restore_sig() to boolean")

x86/urgent: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits")
b2381acd3fd9 ("x86/fpu: Mask out the invalid MXCSR bits properly")

Conflicts:
arch/x86/kernel/fpu/signal.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'i2c/for-current' into i2c/for-mergewindow

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up the fixes in perf/urgent that were just merged into upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'spi-5.15' into spi-5.16

Merge branch 'objtool/urgent'

Fixup conflicts.

# Conflicts:
# tools/objtool/check.c

Merge tag 'v5.15-rc4' into docs-next

This is needed to get a docs fix that entered via the DRM tree; testers
have requested it so that PDF builds in docs-next work again.

Merge tag 'v5.15-rc4' into rdma.get for-next

Merged due to dependencies in following patches.

Conflict in drivers/infiniband/hw/hfi1/ipoib_tx.c resolved by hand to take
the %p change and txq stats

Merge tag 'v5.15-rc4' into rdma.get for-next

Merged due to dependencies in following patches.

Conflict in drivers/infiniband/hw/hfi1/ipoib_tx.c resolved by hand to take
the %p change and txq stats rename together.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge branch x86/cc into x86/core

Pick up dependent cc_platform_has() changes.

Signed-off-by: Borislav Petkov <bp@suse.de>

Merge 5.15-rc4 into driver-core-next

We need the driver core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 5.15-rc3 into staging-next

We need the fixes in here, and it resolves a merge issue with
drivers/staging/r8188eu/os_dep/ioctl_linux.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.

Merge branch 5.15-rc3 into staging-next

We need the fixes in here, and it resolves a merge issue with
drivers/staging/r8188eu/os_dep/ioctl_linux.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 5.15-rc3 into tty-next

We need the tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.15-rc3 into char-misc next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

net/mptcp/protocol.c
977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext")
efe686ffce01 ("mptcp: ensure tx skbs always h

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

net/mptcp/protocol.c
977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext")
efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext")

same patch merged in both trees, keep net-next.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v5.15-rc3' into spi-5.15

Linux 5.15-rc3

Merge 5.15-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Current release - regressions:

- dsa: bcm_sf2: fix array overrun

Merge tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Current release - regressions:

- dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()

Previous releases - regressions:

- introduce a shutdown method to mdio device drivers, and make DSA
switch drivers compatible with masters disappearing on shutdown;
preventing infinite reference wait

- fix issues in mdiobus users related to ->shutdown vs ->remove

- virtio-net: fix pages leaking when building skb in big mode

- xen-netback: correct success/error reporting for the
SKB-with-fraglist

- dsa: tear down devlink port regions when tearing down the devlink
port on error

- nexthop: fix division by zero while replacing a resilient group

- hns3: check queue, vf, vlan ids range before using

Previous releases - always broken:

- napi: fix race against netpoll causing NAPI getting stuck

- mlx4_en: ensure link operstate is updated even if link comes up
before netdev registration

- bnxt_en: fix TX timeout when TX ring size is set to the smallest

- enetc: fix illegal access when reading affinity_hint; prevent oops
on sysfs access

- mtk_eth_soc: avoid creating duplicate offload entries

Misc:

- core: correct the sock::sk_lock.owned lockdep annotations"

* tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
atlantic: Fix issue in the pm resume flow.
net/mlx4_en: Don't allow aRFS for encapsulated packets
net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
nfc: st-nci: Add SPI ID matching DT compatible
MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
nexthop: Fix memory leaks in nexthop notification chain listeners
mptcp: ensure tx skbs always have the MPTCP ext
qed: rdma - don't wait for resources under hw error recovery flow
s390/qeth: fix deadlock during failing recovery
s390/qeth: Fix deadlock in remove_discipline
s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
net: dsa: realtek: register the MDIO bus under devres
net: dsa: don't allocate the slave_mii_bus using devres
Doc: networking: Fox a typo in ice.rst
net: dsa: fix dsa_tree_setup error path
net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
net/smc: add missing error check in smc_clc_prfx_set()
net: hns3: fix a return value error in hclge_get_reset_status()
net: hns3: check vlan id before using it
...

show more ...

Merge branch 'dsa-shutdown'

Vladimir Oltean says:

====================
Make DSA switch drivers compatible with masters which unregister on shutdown

Changes in v2:
- fix build for b53_mmap
- use un

Merge branch 'dsa-shutdown'

Vladimir Oltean says:

====================
Make DSA switch drivers compatible with masters which unregister on shutdown

Changes in v2:
- fix build for b53_mmap
- use unregister_netdevice_many

It was reported by Lino here:

https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/

that when the DSA master attempts to unregister its net_device on
shutdown, DSA should prevent that operation from succeeding because it
holds a reference to it. This hangs the shutdown process.

This issue was essentially introduced in commit 2f1e8ea726e9 ("net: dsa:
link interfaces with the DSA master to get rid of lockdep warnings").
The present series patches all DSA drivers to handle that case,
depending on whether those drivers were introduced before or after the
offending commit, a different Fixes: tag is specified for them.

The approach taken by this series solves the issue in essentially the
same way as Lino's patches, except for three key differences:

- this series takes a more minimal approach in what is done on shutdown,
we do not attempt a full tree teardown as that is not strictly
necessary. I might revisit this if there are compelling reasons to do
otherwise

- this series fixes the issues for all DSA drivers, not just KSZ9897

- this series works even if the ->remove driver method gets called for
the same device too, not just ->shutdown. This is really possible to
happen for SPI device drivers, and potentially possible for other bus
device drivers too.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: be compatible with masters which unregister on shutdown

Lino reports that on his system with bcmgenet as DSA master and KSZ9897
as a switch, rebooting or shutting down never works properly

net: dsa: be compatible with masters which unregister on shutdown

Lino reports that on his system with bcmgenet as DSA master and KSZ9897
as a switch, rebooting or shutting down never works properly.

What does the bcmgenet driver have special to trigger this, that other
DSA masters do not? It has an implementation of ->shutdown which simply
calls its ->remove implementation. Otherwise said, it unregisters its
network interface on shutdown.

This message can be seen in a loop, and it hangs the reboot process there:

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

So why 3?

A usage count of 1 is normal for a registered network interface, and any
virtual interface which links itself as an upper of that will increment
it via dev_hold. In the case of DSA, this is the call path:

dsa_slave_create
-> netdev_upper_dev_link
-> __netdev_upper_dev_link
-> __netdev_adjacent_dev_insert
-> dev_hold

So a DSA switch with 3 interfaces will result in a usage count elevated
by two, and netdev_wait_allrefs will wait until they have gone away.

Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and
delete themselves, but DSA cannot just vanish and go poof, at most it
can unbind itself from the switch devices, but that must happen strictly
earlier compared to when the DSA master unregisters its net_device, so
reacting on the NETDEV_UNREGISTER event is way too late.

It seems that it is a pretty established pattern to have a driver's
->shutdown hook redirect to its ->remove hook, so the same code is
executed regardless of whether the driver is unbound from the device, or
the system is just shutting down. As Florian puts it, it is quite a big
hammer for bcmgenet to unregister its net_device during shutdown, but
having a common code path with the driver unbind helps ensure it is well
tested.

So DSA, for better or for worse, has to live with that and engage in an
arms race of implementing the ->shutdown hook too, from all individual
drivers, and do something sane when paired with masters that unregister
their net_device there. The only sane thing to do, of course, is to
unlink from the master.

However, complications arise really quickly.

The pattern of redirecting ->shutdown to ->remove is not unique to
bcmgenet or even to net_device drivers. In fact, SPI controllers do it
too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers
and MDIO controllers do it too (this is something I have not researched
too deeply, but even if this is not the case today, it is certainly
plausible to happen in the future, and must be taken into consideration).

Since DSA switches might be SPI devices, I2C devices, MDIO devices, the
insane implication is that for the exact same DSA switch device, we
might have both ->shutdown and ->remove getting called.

So we need to do something with that insane environment. The pattern
I've come up with is "if this, then not that", so if either ->shutdown
or ->remove gets called, we set the device's drvdata to NULL, and in the
other hook, we check whether the drvdata is NULL and just do nothing.
This is probably not necessary for platform devices, just for devices on
buses, but I would really insist for consistency among drivers, because
when code is copy-pasted, it is not always copy-pasted from the best
sources.

So depending on whether the DSA switch's ->remove or ->shutdown will get
called first, we cannot really guarantee even for the same driver if
rebooting will result in the same code path on all platforms. But
nonetheless, we need to do something minimally reasonable on ->shutdown
too to fix the bug. Of course, the ->remove will do more (a full
teardown of the tree, with all data structures freed, and this is why
the bug was not caught for so long). The new ->shutdown method is kept
separate from dsa_unregister_switch not because we couldn't have
unregistered the switch, but simply in the interest of doing something
quick and to the point.

The big question is: does the DSA switch's ->shutdown get called earlier
than the DSA master's ->shutdown? If not, there is still a risk that we
might still trigger the WARN_ON in unregister_netdevice that says we are
attempting to unregister a net_device which has uppers. That's no good.
Although the reference to the master net_device won't physically go away
even if DSA's ->shutdown comes afterwards, remember we have a dev_hold
on it.

The answer to that question lies in this comment above device_link_add:

* A side effect of the link creation is re-ordering of dpm_list and the
* devices_kset list by moving the consumer device and all devices depending
* on it to the ends of these lists (that does not happen to devices that have
* not been registered when this function is called).

so the fact that DSA uses device_link_add towards its master is not
exactly for nothing. device_shutdown() walks devices_kset from the back,
so this is our guarantee that DSA's shutdown happens before the master's
shutdown.

Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings")
Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'v5.13' into next

Sync up with the mainline to get the latest parport API.

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3

Merge drm/drm-next into drm-intel-gt-next

Pulling in -rc2 fixes and TTM changes that next upcoming patches depend
on.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>