Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- v4l core: subdev frame interval now supports which fi

Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- v4l core: subdev frame interval now supports which field

- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.

- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900

- new camera driver: STM32 DCMIPP

- s5p-mfc has gained MFC v12 support

- new ISP driver added to staging: Starfive

- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.

- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)

- as usual, lots of cleanups, fixups and driver improvements.

* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...

show more ...

Merge branch 'for-6.8/amd-sfh' into for-linus

- addition of new interfaces to export User presence information and
Ambient light from amd-sfh to other drivers within the kernel (Basavaraj
Natika

Merge branch 'for-6.8/amd-sfh' into for-linus

- addition of new interfaces to export User presence information and
Ambient light from amd-sfh to other drivers within the kernel (Basavaraj
Natikar)

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

media: platform: cros-ec: Add Dexi to the match table

The Google Dexi device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: Ken Lin

media: platform: cros-ec: Add Dexi to the match table

The Google Dexi device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

Merge tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fixes for v6.7-rc3

This includes following USB4/T

Merge tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fixes for v6.7-rc3

This includes following USB4/Thunderbolt fixes for v6.7-rc3:

- Fix a lane bonding issue on ASMedia USB4 device
- Send uevents when link is switched to asymmetric or symmetric
- Only add device router DP IN adapters to the head of resource list
to avoid issues during system resume.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (1451 commits)
thunderbolt: Only add device router DP IN to the head of the DP resource list
thunderbolt: Send uevent after asymmetric/symmetric switch
thunderbolt: Set lane bonding bit only for downstream port

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- the old V4L2 core videobuf kAPI was finally removed.

Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI

- new automotive driver: mgb4

- new platform video driver: npcm-video

- new sensor driver: mt9m114

- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts

- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver

- drop atomisp-specific ov5693, using the upstream driver instead

- the camss driver has gained RDI3 support for VFE 17x

- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore

- lots of driver fixes, cleanups and improvements

* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...

show more ...

media: platform: cros-ec: Add Taranza to the match table

Taranza has two HDMI ports which support CEC:
Port D is EC port 0
Port B is EC port 1

Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-o

media: platform: cros-ec: Add Taranza to the match table

Taranza has two HDMI ports which support CEC:
Port D is EC port 0
Port B is EC port 1

Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: platform: cros-ec: Rename conns array for the match table

Rename conns array to port_**_conns, ** is the ports which support cec.
ex: dibbi_conns support Port D and B will be renamed to port_

media: platform: cros-ec: Rename conns array for the match table

Rename conns array to port_**_conns, ** is the ports which support cec.
ex: dibbi_conns support Port D and B will be renamed to port_db_conns.
Make it much cleaner and readable.

Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: platform: cros-ec: Add Boxy to the match table

The Google Boxy device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: rasheed

media: platform: cros-ec: Add Boxy to the match table

The Google Boxy device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: updated to the new multi-port datastructures]

show more ...

media: cros-ec-cec: Add Constitution to the match table

Constitution has two HDMI ports which support CEC:
Port B is EC port 0
Port A is EC port 1

This patch depends on "media: cros-ec-cec:

media: cros-ec-cec: Add Constitution to the match table

Constitution has two HDMI ports which support CEC:
Port B is EC port 0
Port A is EC port 1

This patch depends on "media: cros-ec-cec: Add Dibbi to the match
table".

Signed-off-by: Stefan Adolfsson <sadolfsson@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: updated to the new multi-port datastructures]

show more ...

media: cros-ec-cec: Add Dibbi to the match table

Dibbi has two HDMI ports which support CEC:
Port D is EC port 0
Port B is EC port 1

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-

media: cros-ec-cec: Add Dibbi to the match table

Dibbi has two HDMI ports which support CEC:
Port D is EC port 0
Port B is EC port 1

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Get number of CEC ports from EC

Add a new CEC port count host command and use it to query the number of
CEC ports from the EC. If the host command is not supported then it must
b

media: cros-ec-cec: Get number of CEC ports from EC

Add a new CEC port count host command and use it to query the number of
CEC ports from the EC. If the host command is not supported then it must
be old EC firmware which only supports one port, so fall back to
assuming one port.

This patch completes support for multiple ports in cros-ec-cec.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Allow specifying multiple HDMI connectors

Update the cec_dmi_match_table to allow specifying multiple HDMI
connectors for each device.

Signed-off-by: Reka Norman <rekanorman@chr

media: cros-ec-cec: Allow specifying multiple HDMI connectors

Update the cec_dmi_match_table to allow specifying multiple HDMI
connectors for each device.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Support receiving messages from multiple ports

Currently, received messages are sent from the EC in the cec_message
MKBP event. Since the size of ec_response_get_next_data_v1 is

media: cros-ec-cec: Support receiving messages from multiple ports

Currently, received messages are sent from the EC in the cec_message
MKBP event. Since the size of ec_response_get_next_data_v1 is 16 bytes,
which is also the maximum size of a CEC message, there is no space to
add a port parameter. Increasing the size of
ec_response_get_next_data_v1 is an option, but this would increase
EC-kernel traffic for all MKBP event types.

Instead, use an event to notify that data is ready, and add a new read
command to read the data.

For backwards compatibility with old EC firmware, continue to handle
cec_message events as well.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Support multiple ports in MKBP cec_events

Use the top four bits of the cec_events MKBP event to store the port
number.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signe

media: cros-ec-cec: Support multiple ports in MKBP cec_events

Use the top four bits of the cec_events MKBP event to store the port
number.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Support multiple ports in write command

Add a v1 of the CEC write command which contains a port parameter. Check
which versions of the write command the EC supports and use the h

media: cros-ec-cec: Support multiple ports in write command

Add a v1 of the CEC write command which contains a port parameter. Check
which versions of the write command the EC supports and use the highest
supported version. If it only supports v0, check that there is only one
port. With v0, the EC will assume all write commands are for port 0.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Support multiple ports in set/get host commands

Reuse the top four bits of the cmd field to specify the port number.
The reason for doing this as opposed to adding a separate uin

media: cros-ec-cec: Support multiple ports in set/get host commands

Reuse the top four bits of the cmd field to specify the port number.
The reason for doing this as opposed to adding a separate uint8_t field
is it avoids the need to add new versions of these commands. The change
is backwards compatible since these bits were previously always zero, so
the default behaviour is to always operate on port 0.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Manage an array of ports

To support multiple CEC ports, change cros_ec_cec to contain an array of
ports, each with their own CEC adapter, etc.

For now, only create a single port

media: cros-ec-cec: Manage an array of ports

To support multiple CEC ports, change cros_ec_cec to contain an array of
ports, each with their own CEC adapter, etc.

For now, only create a single port and use that port everywhere, so
there is no functional change. Support for multiple ports will be added
in the following patches.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: cros-ec-cec: Use cros_ec_cmd to send host commands

Use the cros_ec_cmd helper function to reduce the amount of boilerplate
when sending host commands.

Signed-off-by: Reka Norman <rekanorman@

media: cros-ec-cec: Use cros_ec_cmd to send host commands

Use the cros_ec_cmd helper function to reduce the amount of boilerplate
when sending host commands.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...