Merge tag 'v4.14-rc6' into next

Merge with mainline to bring in the timer API changes.

Merge branch 'x86/urgent' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'iio-for-4.15b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanup for 4.15

New devi

Merge tag 'iio-for-4.15b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanup for 4.15

New device support
* cros_ec_accel_legacy
- New driver for this older chromebook accelerometer.
* ds4422 dac driver
- New driver and bindings for the Maxim ds4422 and ds4424 I2C DACs.
* kxcjk1013
- Support the KXTF9 accelerometers.
* mcp320x
- support mcp3550, mcp3551, mcp3553 21 bit ADCs.
* rfd77402
- new driver for this laser range finder.
* st-sensors-accel
- add support for the LIS2DW12 accelerometer with bindings
- add support for the LIS3DHH accelerometer with bindings

New features
* core
- Drop a duplicate forward declaration in iio.h
* Docs
- add a clarification of the meaning of IIO_DISTANCE to reflect
existing use in various range finding devices.
* st-sensors
- add a register mask for the status register to correctly support
2 channel devices.
- decouple the irq1 and irq2 configuration parameters.
- do not always write the enable_axis register as some newer devices
are always on and don't support such configuration.
- split open-drain control for irq1 and irq2
- make sampling frequency control optional as non all hardware
supports it.
* st-sensors-gyro
- support 3 wire SPI mode
* st-sensors-magn
- support 3 wire SPI mode
* st-sensors-pressure
- support 3 wire SPI mode.

Cleanups and fixes
* ad7192
- expand the buffer lock to cover device state protection rather than
using core mlock to provide the state protection.
* ade7753
- expand the buffer lock to cover device state protection as well
rather than having an additional lock.
* dummy-evgen
- Use the new irq_sim infrastructure rather than having our
own local version of the same thing.
* hid-sensor-trigger
- avoid touching sensors ever if user hasn't requested it. This
is a work around for one reported issue where turning a sensor
off wasn't sufficient to make it actually switch off. As we
have only one report from what looks like buggy hardware we
are sending this upstream the slow way.
* ina2xx
- Adhere to the published ABI docs and use Ohms instead of
microohms. We don't think that anyone will notice this ABI fix
but are sending it the slow route to reduce fallout if someone
does!
* kxcjk1013 - refactors to support the KXTF9 being added.
- Refactor ODR support.
- Fix INT_CTRL/INT_SRC1 bit names to match the register name.
- Extract code for reporting motion events as this isn't present
on some parts to be supported.
- Make the sysfs sampling_frequency_available stuff not a fixed
string so as to allow for it to be chip type dependent.
- Make the sampling frequency_available per type to match
the sampling_frequency attributes.
* lsm6dsx - rework prior to new device support.
- express the max fifo depth in 'scans' rather than bytes.
- split control of the fifo mode fifo output data rate.
- move decimator registers into the sensor_settings structure
as this will make it easier to support devices that don't have
this function.
- add a fifo ops datastructure to allow for inter-part variations.
* max30100
- fix i2c chip address in dt example
* max30102
- use correct binding name for max30102 in example
* mma8452
- Rename read/write event value callbacks to be more generic
reflecting what they actually do now.
* rcar-gyroadc
- pointer case to fix warnings when moving to 64 bit as this IP is
present on new 64 bit SOCs
- enable compile-testing to improve build coverage on this driver.
- use the of_device_get_match_data helper instead of open coding
* sun4i-gpadc-iio
- Register in the thermal framework after pm. Otherwise the IP is not
enabled.
- Don't fail probing if no thermal DT node is present.
* tsl2x7x
- renaming tsl2x7x_settings to settings to avoid excessive line
lengths.
- Use IIO core to generate the integration_time sysfs attributes
rather than hand rolling.
* vf6180
- Move the range check on integration time to the setter function.
- Refactor the code around integration time to be clearer including
caching current integration time avoiding unnecessary chip reads.
- cleanup the als_gain lookup avoiding reading registers on chip.
- use rounded matching rather than precise values for als_gain
lookup.
- Correct the ALS scale when non-default gain or integration time
is used.

show more ...

Merge tag 'v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.14-rc4

iio: accel: add support to LIS3DHH

add support to STMicroelectronics LIS3DHH accel sensor

http://www.st.com/resource/en/datasheet/lis3dhh.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.c

iio: accel: add support to LIS3DHH

add support to STMicroelectronics LIS3DHH accel sensor

http://www.st.com/resource/en/datasheet/lis3dhh.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: accel: add support to LIS2DW12

add support to STMicroelectronics LIS2DW12 accelerometer in
st_accel framework

http://www.st.com/resource/en/datasheet/lis2dw12.pdf

Signed-off-by: Lorenzo Bianc

iio: accel: add support to LIS2DW12

add support to STMicroelectronics LIS2DW12 accelerometer in
st_accel framework

http://www.st.com/resource/en/datasheet/lis2dw12.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge airlied/drm-next into drm-misc-next

Just catching up with upstream.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'v4.14-rc2' into patchwork

Linux 4.14-rc2

* tag 'v4.14-rc2': (12066 commits)
Linux 4.14-rc2
tpm: ibmvtpm: simplify crq initialization and document crq format
tpm: replace msleep() w

Merge tag 'v4.14-rc2' into patchwork

Linux 4.14-rc2

* tag 'v4.14-rc2': (12066 commits)
Linux 4.14-rc2
tpm: ibmvtpm: simplify crq initialization and document crq format
tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers
Documentation: tpm: add powered-while-suspended binding documentation
tpm: tpm_crb: constify acpi_device_id.
tpm: vtpm: constify vio_device_id
security: fix description of values returned by cap_inode_need_killpriv
x86/asm: Fix inline asm call constraints for Clang
objtool: Handle another GCC stack pointer adjustment bug
inet: fix improper empty comparison
net: use inet6_rcv_saddr to compare sockets
net: set tb->fast_sk_family
net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
MAINTAINERS: update git tree locations for ieee802154 subsystem
SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
SMB3: handle new statx fields
arch: remove unused *_segments() macros/functions
parisc: Unbreak bootloader due to gcc-7 optimizations
parisc: Reintroduce option to gzip-compress the kernel
apparmor: fix apparmorfs DAC access permissions
...

show more ...

Merge drm-upstream/drm-next into drm-intel-next-queued

Need MST sideband message transaction to power up/down nodes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v4.14-rc2' into k.o/for-next

Merge my for-next branch to Linux 4.14-rc2 and open up the for-next area
for 4.15 kernel development.

Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge tag 'v4.14-rc2' into next-general

Linux 4.14-rc2

Sync to v4.14-rc2 for security subsystem developers to track.

Merge tag 'ib-mfd-many-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge "Immutable branch between MFD and many other subsystems due for
the v4.14 merge window" to get

Merge tag 'ib-mfd-many-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge "Immutable branch between MFD and many other subsystems due for
the v4.14 merge window" to get the TWL headers moved to the right place.

show more ...

Merge remote-tracking branch 'origin/master' into drm-misc-fixes

Pick up 4.14-rc1

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge tag 'v4.14-rc1' into asoc-rockchip

Linux 4.14-rc1

Merge branches 'fixes' and 'misc' into for-linus

Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
"Here is the big staging and IIO driver update for 4.14-rc

Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
"Here is the big staging and IIO driver update for 4.14-rc1.

Lots of staging driver fixes and cleanups, including some reorginizing
of the lustre header files to try to impose some sanity on what is,
and what is not, the uapi for that filesystem.

There are some tty core changes in here as well, as the speakup
drivers need them, and that's ok with me, they are sane and the
speakup code is getting nicer because of it.

There is also the addition of the obiligatory new wifi driver, just
because it has been a release or two since we added our last one...

Other than that, lots and lots of small coding style fixes, as usual.

All of these have been in linux-next for a while with no reported
issues"

* tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits)
staging:rtl8188eu:core Fix remove unneccessary else block
staging: typec: fusb302: make structure fusb302_psy_desc static
staging: unisys: visorbus: make two functions static
staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks
staging: r8822be: Simplify deinit_priv()
staging: r8822be: Remove some dead code
staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability
staging:rtl8188eu Fix comparison to NULL
staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd
Staging: Pi433: style fix - tabs and spaces
staging: pi433: fix spelling mistake: "preample" -> "preamble"
staging:rtl8188eu:core Fix Code Indent
staging: typec: fusb302: Export current-limit through a power_supply class dev
staging: typec: fusb302: Add support for USB2 charger detection through extcon
staging: typec: fusb302: Use client->irq as irq if set
staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
staging: typec: fusb302: Set max supply voltage to 5V
staging: typec: tcpm: Add get_current_limit tcpc_dev callback
staging:rtl8188eu Use __func__ instead of function name
staging: lustre: coding style fixes found by checkpatch.pl
...

show more ...

Merge origin/master into drm-misc-fixes

Backmerge 4.13-rc5 into drm-misc-fixes, it was getting a
little stale.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge tag 'v4.13-rc1' into omap-for-v4.14/mmc-regulator

Linux v4.13-rc1

Merge branch 'for-linus' into for-next

Back-merge 4.13-rc devel branch for later development.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.13

Quite a few fixes here that have been sent since the merge window,

Merge tag 'asoc-fix-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.13

Quite a few fixes here that have been sent since the merge window, the
biggest one is the fix from Tony for some confusion with the device
property API which was causing issues with the of-graph card. This is
fixed with some changes in the graph API itself as it seemed very likely
to be error prone.

show more ...

Merge branch 'perf/urgent' into perf/core, to pick up latest fixes and refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'iio-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.14 cyc

Merge tag 'iio-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.14 cycle.

4 completely new drivers in this set and plenty of other stuff.

One ABI change due to a silly mistake a long time back. Hopefully no
one will notice. It effects the numerical order of consumer device
channels which was the reverse of the obvious. It's going the slow
way to allow us some margin to spot if we have broken userspace or
not (seems unlikely)

New Device Support
* ccs811
- new driver for the Volatile Organic Compounds (VOC) sensor.
* dln2 adc
- new driver for the ADC on this flexible usb board.
* EP93xx
- new driver for this Cirrus logic SoC ADC.
* ltc2471
- new ADC driver support the ltc2471 and ltc2473
* st_accel
- add trivial table entries to support H3LIS331DL, LIS331DL, LIS3LV02DL.
* st_gyro
- add L3GD20H support (again) having fixed the various things that were
broken in the first try. Includes devicetree binding.
* stm32 dac
- add support for the DACs in the STM32F4 series

Features
* Documentation
- add missing power attribute documentation to the ABI docs.
* at91-sama5d2
- add hardware trigger and buffered capture support with bindings.
- suspend and resume functionality.
* bmc150
- support for the BOSC0200 ACPI device id seen on some tablets.
* hdc100x
- devicetree bindings
- document supported devices
- match table and device ids.
* hts221
- support active low interrupts (with bindings)
- open drain mode with bindings.
* htu21
- OF match table and bindings.
* lsm6dsx
- open drain mode with bindings
* ltc2497
- add support for board file based consumer mapping.
* ms5367
- OF match table and bindings.
* mt7622
- binding document and OF match table.
- suspend and resume support.
* rpr0521
- triggered buffer support.
* tsys01
- OF match table and bindings.

Cleanups and minor fixes
* core
- fix ordering of IIO channels to entry numbers when using
iio_map_array_register rather than reversing them.
- use the new %pOF format specifier rather than full name for the
device tree nodes.
* ad7280a
- fix potential issue with macro argument reuse.
* ad7766
- drop a pointless NULL value check as it's done in the gpiod code.
* adis16400
- unsigned -> unsigned int.
* at91 adc
- make some init data static to reduce code size.
* at91-sama5d2 ADC
- make some init data static to reduce code size.
* da311
- make some init data static to reduce code size.
* hid-sensor-rotation
- drop an unnecessary static.
* hts221
- refactor the write_with_mask code.
- move the BDU configuration to probe time as there is no reason for it
to change.
- avoid overwriting reserved data during power-down. This is a fix, but
the infrastructure need was too invasive to send it to mainline except
in a merge window. It's not a regression as it was always wrong.
- avoid reconfigure the sampling frequency multiple times by just
doing it in the write_raw function directly.
- refactor the power_on/off calls into a set_enable.
- move the dry-enable logic into trig_set_state as that is the only
place it was used.
* ina219
- fix polling of ina226 conversion ready flag.
* imx7d
- add vendor name in kconfig for consistency with similar parts.
* mcp3422
- Change initial channel to 0 as it feels more logical.
- Check for some errors in probe.
* meson-saradc
- add a check of of_match_device return value.
* mpu3050
- allow open drain for any interrupt type.
* rockchip adc
- add check on of_match_device return value.
* sca3000
- drop a trailing whitespace.
* stm32 adc
- make array stm32h7_adc_ckmodes_spec static.
* stm32 dac
- fix an error message.
* stm32 timers
- fix clock name in docs to match reality after changes.
* st_accel
- explicit OF table (spi).
- add missing entries to OF table (i2c).
- rename of_device_id table to drop the part name.
- adding missing lis3l02dq entry to bindings.
- rename H3LIS331DL_DRIVER_NAME to line up with similar entries in driver.
* st_gyro
- explicit OF table (spi).
* st_magn
- explicit OF table (spi).
- enable multiread for lis3mdl.
* st_pressure
- explicit OF table (spi).
* st_sensors common.
- move st_sensors_of_i2c_probe and rename to make it available for spi
drivers.
* tsc3472
- don't write an extra byte when writing the ATIME register.
- add a link to the datasheet.
* tsl2x7x - continued staging cleanups
- add of_match_table.
- drop redundant power_state sysfs attribute.
- drop wrapper tsl2x7x_i2c_read.
- clean up i2c calls made in tsl2x7x_als_calibrate.
- refactor the read and write _event_value callbacks to handle additional
elements.
- use usleep_range instead of mdelay.
- check return value from tsl2x7x_invoke_change.
* zpa2326
- add some newline to the end of logging macros.

show more ...

Merge airlied/drm-next into drm-intel-next-queued

Resync with upstream to avoid git getting too badly confused. Also, we
have a conflict with the drm_vblank_cleanup removal, which cannot be
resolved

Merge airlied/drm-next into drm-intel-next-queued

Resync with upstream to avoid git getting too badly confused. Also, we
have a conflict with the drm_vblank_cleanup removal, which cannot be
resolved by simply taking our side. Bake that in properly.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge airlied/drm-next into drm-misc-next

I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.

Also squash in conf

Merge airlied/drm-next into drm-misc-next

I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.

Also squash in conflict fixup from Laurent Pinchart.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

sync to Linus v4.13-rc2 for subsystem developers to work against