Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"The amd-pstate cpufreq driver gets the majority of chang

Merge tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"The amd-pstate cpufreq driver gets the majority of changes this time.
They are mostly fixes and cleanups, but one of them causes it to
become the default cpufreq driver on some AMD server platforms.

Apart from that, the menu cpuidle governor is modified to not use
iowait any more, the intel_idle gets a custom C-states table for
Granite Rapids Xeon D, and the intel_pstate driver will use a more
aggressive Balance- performance default EPP value on Granite Rapids
now.

There are also some fixes, cleanups and tooling updates.

Specifics:

- Update the amd-pstate driver to set the initial scaling frequency
policy lower bound to be the lowest non-linear frequency (Dhananjay
Ugwekar)

- Enable amd-pstate by default on servers starting with newer AMD
Epyc processors (Swapnil Sapkal)

- Align more codepaths between shared memory and MSR designs in
amd-pstate (Dhananjay Ugwekar)

- Clean up amd-pstate code to rename functions and remove redundant
calls (Dhananjay Ugwekar, Mario Limonciello)

- Do other assorted fixes and cleanups in amd-pstate (Dhananjay
Ugwekar and Mario Limonciello)

- Change the Balance-performance EPP value for Granite Rapids in the
intel_pstate driver to a more performance-biased one (Srinivas
Pandruvada)

- Simplify MSR read on the boot CPU in the ACPI cpufreq driver (Chang
S. Bae)

- Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds to always enforce sched domains rebuild in case EAS needs
to be enabled (Christian Loehle)

- Switch cpufreq back to platform_driver::remove() (Uwe Kleine-König)

- Use proper frequency unit names in cpufreq (Marcin Juszkiewicz)

- Add a built-in idle states table for Granite Rapids Xeon D to the
intel_idle driver (Artem Bityutskiy)

- Fix some typos in comments in the cpuidle core and drivers (Shen
Lichuan)

- Remove iowait influence from the menu cpuidle governor (Christian
Loehle)

- Add min/max available performance state limits to the Energy Model
management code (Lukasz Luba)

- Update pm-graph to v5.13 (Todd Brandt)

- Add documentation for some recently introduced cpupower utility
options (Tor Vic)

- Make cpupower inform users where cpufreq-bench.conf should be
located when opening it fails (Peng Fan)

- Allow overriding cross-compiling env params in cpupower (Peng Fan)

- Add compile_commands.json to .gitignore in cpupower (John B. Wyatt
IV)

- Improve disable c_state block in cpupower bindings and add a test
to confirm that CPU state is disabled to it (John B. Wyatt IV)

- Add Chinese Simplified translation to cpupower (Kieran Moy)

- Add checks for xgettext and msgfmt to cpupower (Siddharth Menon)"

* tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
cpufreq: intel_pstate: Update Balance-performance EPP for Granite Rapids
cpufreq: ACPI: Simplify MSR read on the boot CPU
sched/cpufreq: Ensure sd is rebuilt for EAS check
intel_idle: add Granite Rapids Xeon D support
PM: EM: Add min/max available performance state limits
cpufreq/amd-pstate: Move registration after static function call update
cpufreq/amd-pstate: Push adjust_perf vfunc init into cpu_init
cpufreq/amd-pstate: Align offline flow of shared memory and MSR based systems
cpufreq/amd-pstate: Call cppc_set_epp_perf in the reenable function
cpufreq/amd-pstate: Do not attempt to clear MSR_AMD_CPPC_ENABLE
cpufreq/amd-pstate: Rename functions that enable CPPC
cpufreq/amd-pstate-ut: Add fix for min freq unit test
amd-pstate: Switch to amd-pstate by default on some Server platforms
amd-pstate: Set min_perf to nominal_perf for active mode performance gov
cpufreq/amd-pstate: Remove the redundant amd_pstate_set_driver() call
cpufreq/amd-pstate: Remove the switch case in amd_pstate_init()
cpufreq/amd-pstate: Call amd_pstate_set_driver() in amd_pstate_register_driver()
cpufreq/amd-pstate: Call amd_pstate_register() in amd_pstate_init()
cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq
cpufreq/amd-pstate: Remove the redundant verify() function
...

show more ...

Merge back cpufreq material for 6.13

cpufreq: ACPI: Simplify MSR read on the boot CPU

Replace the 32-bit MSR access function with a 64-bit variant to simplify
the call site, eliminating unnecessary 32-bit value manipulations.

Signed-o

cpufreq: ACPI: Simplify MSR read on the boot CPU

Replace the 32-bit MSR access function with a 64-bit variant to simplify
the call site, eliminating unnecessary 32-bit value manipulations.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20241106182313.165297-1-chang.seok.bae@intel.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

Merge back cpufreq material for 6.13

cpufreq: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
p

cpufreq: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/cpufreq to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241020153910.324096-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible cha

Merge tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.

As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.

Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.

Specifics:

- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)

- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)

- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)

- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)

- Several OF related cleanups in cpufreq drivers (Rob Herring)

- Enable COMPILE_TEST for ARM drivers (Rob Herrring)

- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)

- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)

- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)

- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)

- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)

- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)

- Add extra unit test coverage for mode state machine (Mario
Limonciello)

- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)

- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)

- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)

- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)

- Remove dead code from cpuidle_enter_state() (Dhruva Gole)

- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)

- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)

- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)

- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)

- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)

- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)

- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)

- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)

- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)

- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)

- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)

- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)

- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)

- Make cpupower display residency value in idle-info (Aboorva
Devarajan)

- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)

- Add SWIG support to cpupower (John B. Wyatt IV)"

* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...

show more ...

Merge branch 'pm-cpufreq'

Merge cpufreq updates for 6.12-rc1:

- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).

- Add support for Granite Rapids and Sierra Forest in OOB mode to the
int

Merge branch 'pm-cpufreq'

Merge cpufreq updates for 6.12-rc1:

- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).

- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada).

- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki).

- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson).

- Several OF related cleanups in cpufreq drivers (Rob Herring).

- Enable COMPILE_TEST for ARM drivers (Rob Herrring).

- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole, Nishanth Menon).

- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar).

- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).

- Make amd-pstate validate return of any attempt to update EPP limits,
which fixes the masking hardware problems (Mario Limonciello).

- Move the calculation of the AMD boost numerator outside of amd-pstate,
correcting acpi-cpufreq on systems with preferred cores (Mario
Limonciello).

- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello).

- Add extra unit test coverage for mode state machine (Mario
Limonciello).

- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu).

* pm-cpufreq: (35 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
...

show more ...

Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:

"* Move the

Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:

"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"

* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c

show more ...

x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()

The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CP

x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()

The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.

Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

show more ...

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>