ARM: dts: qcom: Label serial nodes for aliasing and stdout-path

Add a label to the serial nodes that are being used for the
console.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

ARM: dts: qcom: Add ks8851 node for wired ethernet

The micrel ks8851 device is present on MSM8960 CDP boards. It is
connected to two regulators, one controlled via a gpio and
another controlled via

ARM: dts: qcom: Add ks8851 node for wired ethernet

The micrel ks8851 device is present on MSM8960 CDP boards. It is
connected to two regulators, one controlled via a gpio and
another controlled via the RPM. Add the gsbi, spi, gpio
regulator, and micrel ks8851 nodes so that ethernet works
properly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

show more ...

ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes

Add the basic RPM and RPM regulator nodes that boards can fill in
with their board specific details.

Signed-off-by: Stephen Boyd <sboyd@codea

ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes

Add the basic RPM and RPM regulator nodes that boards can fill in
with their board specific details.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

show more ...

ARM: dts: qcom: Replace gpio node with pinctrl node

Now that we have a proper pinctrl driver for the gpio block we
can change the compatible field here and configure the pinmux on
msm8960 devices.

ARM: dts: qcom: Replace gpio node with pinctrl node

Now that we have a proper pinctrl driver for the gpio block we
can change the compatible field here and configure the pinmux on
msm8960 devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

show more ...

arm: dts: qcom: Add LCC nodes

Add the node for the LPASS clock controller found on a few qcom
SoCs so that the clock driver can probe.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-o

arm: dts: qcom: Add LCC nodes

Add the node for the LPASS clock controller found on a few qcom
SoCs so that the clock driver can probe.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Added apq8064 and msm8960 nodes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm: dts: qcom: Add TCSR support for MSM8960

This patch adds TCSR support for use by the GSBI to automatically
configure ADM CRCI values based on the GSBI port configuration.

Signed-off-by: Andy Gr

arm: dts: qcom: Add TCSR support for MSM8960

This patch adds TCSR support for use by the GSBI to automatically
configure ADM CRCI values based on the GSBI port configuration.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: DT: msm8960: Add sdcc nodes

Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.

Cc: S

ARM: DT: msm8960: Add sdcc nodes

Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

show more ...

ARM: dts: msm: Add 8921 PMIC to ssbi bus

Add the PMIC and the sub-devices that are currently supported in
the kernel to the DT.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kum

ARM: dts: msm: Add 8921 PMIC to ssbi bus

Add the PMIC and the sub-devices that are currently supported in
the kernel to the DT.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

show more ...

ARM: dts: qcom: Update msm8960 device trees

* Move SoC peripherals into an SoC container node
* Move serial enabling into board file (qcom-msm8960-cdp.dts)
* Cleanup cpu node to match binding spec,

ARM: dts: qcom: Update msm8960 device trees

* Move SoC peripherals into an SoC container node
* Move serial enabling into board file (qcom-msm8960-cdp.dts)
* Cleanup cpu node to match binding spec, enable-method and compatible
should be per cpu, not part of the container
* Drop interrupts property from l2-cache node as its not part of the
binding spec
* Add GSBI node and configuration of GSBI controller

Signed-off-by: Kumar Gala <galak@codeaurora.org>

show more ...

Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
"A large part of the arm-soc patches are nowadays DT changes, a

Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
"A large part of the arm-soc patches are nowadays DT changes, adding
support for new SoCs, boards and devices without changing kernel
source. The plan is still to move the devicetree files out of the
kernel tree and reduce the amount of churn going on here, but we keep
finding reasons to delay doing that.

Changes are really all over the place, with little sticking out
particularly. We have contributions from a total of 116 people in
this branch.

Unfortunately, the size of this branch also causes a significant
number of conflicts at the moment, typically when subsystem
maintainers merge patches that change the driver at the same time as
the dts files. In most cases this could be avoided because the dts
changes are supposed to be compatible in both ways, and we are asking
everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
dts: stmmac: Document the clocks property in the stmmac base document
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
ARM: STi: stih416: Add support for the FSM Serial Flash Controller
ARM: tegra: fix Dalmore pinctrl configuration
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
ARM: dts: Build all keystone dt blobs
ARM: dts: keystone: Fix control register range for clktsip
ARM: dts: keystone: Fix domain register range for clkfftc1
ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
ARM: dts: bcm21664: Add device tree files.
ARM: DT: bcm21664: Device tree bindings
ARM: efm32: properly namespace i2c location property
ARM: efm32: fix unit address part in USART2 device nodes' names
ARM: mvebu: Enable NAND controller in Armada 385-DB
ARM: mvebu: Add support for NAND controller in Armada 38x SoC
ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
...

show more ...

ARM: dts: msm: Add krait-pmu to platforms with Krait CPUs

Allows us to probe the performance counters on Krait CPUs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <w

ARM: dts: msm: Add krait-pmu to platforms with Krait CPUs

Allows us to probe the performance counters on Krait CPUs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[olof: Moved 8960 contents to the dtsi instead]
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: dts: qcom-msm8960-cdp: Add RNG device tree node

Add the necessary DT node to probe the rng driver on
msm8960-cdp platform.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Tested-by: St

ARM: dts: qcom-msm8960-cdp: Add RNG device tree node

Add the necessary DT node to probe the rng driver on
msm8960-cdp platform.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

show more ...

ARM: dts: qcom: Add nodes necessary for SMP boot

Add the necessary nodes to support SMP on MSM8660, MSM8960, and
MSM8974/APQ8074. While we're here also add in the error
interrupts for the Krait cach

ARM: dts: qcom: Add nodes necessary for SMP boot

Add the necessary nodes to support SMP on MSM8660, MSM8960, and
MSM8974/APQ8074. While we're here also add in the error
interrupts for the Krait cache error detection.

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
[sboyd: Split into separate patch, add error interrupts]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

show more ...

ARM: dts: msm: split out msm8660 and msm8960 soc into dts include

Pull the SoC device tree bits into their own files so other boards based
on these SoCs can include them and reduce duplication acros

ARM: dts: msm: split out msm8660 and msm8960 soc into dts include

Pull the SoC device tree bits into their own files so other boards based
on these SoCs can include them and reduce duplication across a number of
boards.

Signed-off-by: Kumar Gala <galak@codeaurora.org>

show more ...